Decal dán trang trí chống thấm nước hình Hello Kitty Avatar
₫ 59.400
Sản phẩm Decal dán trang trí chống thấm nước hình Hello Kitty Avatar đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Brand: 3M
Model: DIY
All baby real flash shooting! ! !
Please communicate with the store before payment. Shop for customers who do not communicate. Please do not ship. Please forgive me! ! !
●Name: Kitty avatar
●Size: about w:60mm
●Material: Waterproof sticker
●Color: Pink (default is pink Manufactured according to requirements)
Instructions for use:
○ dry paste method: (for small car stickers)
◎ clean body to keep dry
Appropriate position to uncover the transfer film together with the car sticker, while sticking with the tool and flattening the bottom paper slowly.
◎When the car has a small width and width, the transfer film and sticker can be peeled off and then attached. Be careful to avoid sticking or landing.
◎ After cleaning, use a clean rag or scraper to scrape repeatedly until there is no air bubble in the sticker to remove the transfer film.
◎It is not easy to post it for a short time. Exposure or car wash
○ Wet paste method: (for large car stickers)
◎ Clean the body evenly spray water on the part to be attached to reduce the viscosity and adjust the position
◎Determine the position to be affixed. Unfold the transfer film together with the car sticker and sew it with a tool while squeezing the bottom paper slowly (from top to bottom or from right to left)
◎ In case of bumps or recesses in the body, the material should be cut and wrapped or cut.
◎The door and the seam should be divided into inwardly by the utility knife
◎Adjust the position of the picture. Use a clean rag or scraper to repeatedly scrape until there is no air bubble in the car sticker to remove the transfer film.
◎ After the completion, let the moisture in the car sticker dry and heat it with a hot air gun. Dry
◎It is recommended that it is not easy to expose to the sun or car wash in a short time after pos
Model: DIY
All baby real flash shooting! ! !
Please communicate with the store before payment. Shop for customers who do not communicate. Please do not ship. Please forgive me! ! !
●Name: Kitty avatar
●Size: about w:60mm
●Material: Waterproof sticker
●Color: Pink (default is pink Manufactured according to requirements)
Instructions for use:
○ dry paste method: (for small car stickers)
◎ clean body to keep dry
Appropriate position to uncover the transfer film together with the car sticker, while sticking with the tool and flattening the bottom paper slowly.
◎When the car has a small width and width, the transfer film and sticker can be peeled off and then attached. Be careful to avoid sticking or landing.
◎ After cleaning, use a clean rag or scraper to scrape repeatedly until there is no air bubble in the sticker to remove the transfer film.
◎It is not easy to post it for a short time. Exposure or car wash
○ Wet paste method: (for large car stickers)
◎ Clean the body evenly spray water on the part to be attached to reduce the viscosity and adjust the position
◎Determine the position to be affixed. Unfold the transfer film together with the car sticker and sew it with a tool while squeezing the bottom paper slowly (from top to bottom or from right to left)
◎ In case of bumps or recesses in the body, the material should be cut and wrapped or cut.
◎The door and the seam should be divided into inwardly by the utility knife
◎Adjust the position of the picture. Use a clean rag or scraper to repeatedly scrape until there is no air bubble in the car sticker to remove the transfer film.
◎ After the completion, let the moisture in the car sticker dry and heat it with a hot air gun. Dry
◎It is recommended that it is not easy to expose to the sun or car wash in a short time after pos