Decal dán trang trí bảo vệ máy chơi game PS4 hình nhân vật hư cấu Tokisaki Kurumi
₫ 188.800
Sản phẩm Decal dán trang trí bảo vệ máy chơi game PS4 hình nhân vật hư cấu Tokisaki Kurumi đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Description:
Note: The product is only suitable for PS4 , Not fit for PS4 Slim or PS4 Pro
Protect your Console from scratch & dust
Stylish & fashional design
Decorate & beautify your console
Great gift choice for friends
Fit for: Playstation 4
Package Included(As the picture showed):
1 x set console skin.
2 x controller skins.
Note: Not include the Console and Controller.
Install steps:
1)Clean the unit's surface as thoroughly as possible.Use rubbing
alcohol on a lint-free cloth to remove any grease or other contaminates.
Most issues of non-sticking are due to some type of oil or grease that
is on the unit PRIOR to installation.
2)Peel one piece of the Skin from the paper liner. Do not let the adhesive side touch anything.
3)Determine the placement, apply the Skin(Sticker) to the surface using
your fingers or the side of your thumb, starting from one corner and
working your way across the surface.
4)If a piece is not going on straight, you can gently lift it back up. Do not stretch it from its original size.
5)There should be NO air bubbles left under the skin(Stic
Note: The product is only suitable for PS4 , Not fit for PS4 Slim or PS4 Pro
Protect your Console from scratch & dust
Stylish & fashional design
Decorate & beautify your console
Great gift choice for friends
Fit for: Playstation 4
Package Included(As the picture showed):
1 x set console skin.
2 x controller skins.
Note: Not include the Console and Controller.
Install steps:
1)Clean the unit's surface as thoroughly as possible.Use rubbing
alcohol on a lint-free cloth to remove any grease or other contaminates.
Most issues of non-sticking are due to some type of oil or grease that
is on the unit PRIOR to installation.
2)Peel one piece of the Skin from the paper liner. Do not let the adhesive side touch anything.
3)Determine the placement, apply the Skin(Sticker) to the surface using
your fingers or the side of your thumb, starting from one corner and
working your way across the surface.
4)If a piece is not going on straight, you can gently lift it back up. Do not stretch it from its original size.
5)There should be NO air bubbles left under the skin(Stic