Đế đỡ chuyên dụng cắt sắt đa năng DIY
835.917
₫ 752.325
Sản phẩm Đế đỡ chuyên dụng cắt sắt đa năng DIY đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 835.917 xuống còn ₫ 752.325, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Multifunctional Metalworking DIY Aluminum Bracket Iron Base Angle Grinder Holder Support For Cutting Machine Angle Grinder Stand BG-6125B
If you want to see more, please click #bestwayshop to enter shop
This grinder holder securely holds your angle grinder for better control of the cutting wheel, essentially turning your grinder into a mini chop saw for precise cutting of pipe, rebar or tubing.
Features:
Multi-angle adjustable cutting.
Protective cover design is safe and reliable.
Aluminum bracket with a plastics anti-skidding handle for better cutting control.
Angle grinder stand can be used as a simple cutting machine by clamping an angle grinder.
Suitable for angle grinder with disc diameter 100mm, 115mm or 125mm.
Iron base screws or bolts to a workbench or stand.
Quick clamp has a 0 degree to 45 degree swing.
Aluminum bracket with a p-lastic anti-skidding handle for better cutting control.
Suitable for angle grinder with disc diameter 100mm, 115mm or 125mm.
The grinder holder securely holds your 100/115/125mm angle grinder for better control of the cutting wheel, essentially turning your grinder into a mini chop saw for precise cutting of pipe, rebar or tubing.
Specifications:
Model Number: BG-6125B
DIY Supplies: Metalworking
Main Material: aluminum, iron
Application Machine: 100/115/125mm
Cutting Angle: 0-45°
Max Cutting Width: 80mm
Item Weight: 1980g / 4.37lb
Package Weight: 2260g / 4.98lb
Package Size: 260 * 260 * 140mm / 10.24 * 10.24 * 5.51in
Note:
Please allow 1-30mm differs due to manual measurement.
Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.
Operation:
Clamp Work Piece:
Rotate the screw knob and loosen the clamp, put work piece in the clamp and then tighten the screw to hold the work piece securely.
Adjust the position and angle of work piece.
Loosen the screws to adjust the position and angle of the clamp. Tighten the screws after the position is adjusted. Please ensure that the work piece should be in the centre of cutting dics.
Cutting:
Switch on the angle grinder and press down handle to cut the work piece with the angle grinder.
Package List:
1 * Angle Grinder Stand
1 * One Pack Of Accessory
1 * Base
1 * Handle
1 * Protective Plastic
If you want to see more, please click #bestwayshop to enter shop
This grinder holder securely holds your angle grinder for better control of the cutting wheel, essentially turning your grinder into a mini chop saw for precise cutting of pipe, rebar or tubing.
Features:
Multi-angle adjustable cutting.
Protective cover design is safe and reliable.
Aluminum bracket with a plastics anti-skidding handle for better cutting control.
Angle grinder stand can be used as a simple cutting machine by clamping an angle grinder.
Suitable for angle grinder with disc diameter 100mm, 115mm or 125mm.
Iron base screws or bolts to a workbench or stand.
Quick clamp has a 0 degree to 45 degree swing.
Aluminum bracket with a p-lastic anti-skidding handle for better cutting control.
Suitable for angle grinder with disc diameter 100mm, 115mm or 125mm.
The grinder holder securely holds your 100/115/125mm angle grinder for better control of the cutting wheel, essentially turning your grinder into a mini chop saw for precise cutting of pipe, rebar or tubing.
Specifications:
Model Number: BG-6125B
DIY Supplies: Metalworking
Main Material: aluminum, iron
Application Machine: 100/115/125mm
Cutting Angle: 0-45°
Max Cutting Width: 80mm
Item Weight: 1980g / 4.37lb
Package Weight: 2260g / 4.98lb
Package Size: 260 * 260 * 140mm / 10.24 * 10.24 * 5.51in
Note:
Please allow 1-30mm differs due to manual measurement.
Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.
Operation:
Clamp Work Piece:
Rotate the screw knob and loosen the clamp, put work piece in the clamp and then tighten the screw to hold the work piece securely.
Adjust the position and angle of work piece.
Loosen the screws to adjust the position and angle of the clamp. Tighten the screws after the position is adjusted. Please ensure that the work piece should be in the centre of cutting dics.
Cutting:
Switch on the angle grinder and press down handle to cut the work piece with the angle grinder.
Package List:
1 * Angle Grinder Stand
1 * One Pack Of Accessory
1 * Base
1 * Handle
1 * Protective Plastic