DC Thiết Bị Dò Sạc Nhanh Type-C Pd2.0 Pd3.0 Kích Hoạt Chuyển Đổi B G8Vn
₫ 171.000
Sản phẩm DC Thiết Bị Dò Sạc Nhanh Type-C Pd2.0 Pd3.0 Kích Hoạt Chuyển Đổi B G8Vn đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Maximum power support to 100W, excellent compatibility.
The version with USB uses a 5A high current PAL female base with a small internal resistance.
Large-capacity ceramic filtering, TVS anti-surge anti-reverse connection, Japan ALPS tact switch, focusing on stability.
With USB soldering position and 5.08 screw terminal soldering position, it is convenient to make Type-C to DC adapter cable.
Small size soldered DC line heat shrinkable tube can be used to charge your notebook with PD mobile power.
Withstand voltage between positive and negative 20V between any two terminals of industrial grade, the input voltage is reversed
Effectively prevent problems such as VBUS short circuit to CC burning during testing.
It is very suitable for test fixtures to directly measure the bare power ule without flying the assembly.
Or DIY fast charging lure with plug, no hardware switch is not easy to accily press the voltage.
The hole pitch is 2.54mm, which is convenient for the welding pin to be inserted into other motherboards.
TRIG foot-to-ground connection is equivalent to button press, which can be triggered by optocoupler or relay isolation.
If CC1 or CC2 is connected to the male, you only need to pick one of them.
The rest of the operation is exactly the same as the regular version.
Condition: New
Type: Voltage Regulator
el Number: Type-C PD Trigger
Application: Computer
Supply Voltage: PD 2.0 3.0
Dissipation Power: Type-C PD Trigger
Type: B / C / A
colour:Green
Material:PCB
size:30 x 15mm
Package Contents:
1 x Power Supply Change Board ule
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
The version with USB uses a 5A high current PAL female base with a small internal resistance.
Large-capacity ceramic filtering, TVS anti-surge anti-reverse connection, Japan ALPS tact switch, focusing on stability.
With USB soldering position and 5.08 screw terminal soldering position, it is convenient to make Type-C to DC adapter cable.
Small size soldered DC line heat shrinkable tube can be used to charge your notebook with PD mobile power.
Withstand voltage between positive and negative 20V between any two terminals of industrial grade, the input voltage is reversed
Effectively prevent problems such as VBUS short circuit to CC burning during testing.
It is very suitable for test fixtures to directly measure the bare power ule without flying the assembly.
Or DIY fast charging lure with plug, no hardware switch is not easy to accily press the voltage.
The hole pitch is 2.54mm, which is convenient for the welding pin to be inserted into other motherboards.
TRIG foot-to-ground connection is equivalent to button press, which can be triggered by optocoupler or relay isolation.
If CC1 or CC2 is connected to the male, you only need to pick one of them.
The rest of the operation is exactly the same as the regular version.
Condition: New
Type: Voltage Regulator
el Number: Type-C PD Trigger
Application: Computer
Supply Voltage: PD 2.0 3.0
Dissipation Power: Type-C PD Trigger
Type: B / C / A
colour:Green
Material:PCB
size:30 x 15mm
Package Contents:
1 x Power Supply Change Board ule
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1