[ĐẦY ĐỦ]3D Printer Control Board MKS Gen L V1.0 Integrated Ramps 1.4 Motherboard 12/24V
470.100
₫ 288.300
Sản phẩm [ĐẦY ĐỦ]3D Printer Control Board MKS Gen L V1.0 Integrated Ramps 1.4 Motherboard 12/24V đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 470.100 xuống còn ₫ 288.300, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
welcome to easyturn.vn
[??Y ??]3D Printer Control Board MKS Gen L V1.0 Integrated Ramps 1.4 Motherboard 12/24V
Specification:
Brand new
2560 and ramps1.4 are intergrated on a piece of board, which solves the problem of complicated and easy failure for Ramps1.4 composite interface.
Users can change their own motor drive, support 4988 drive and 8825 drive, TMC2100 drive.
Using CH340 serial chip to ensure the stable and reliable premise, reduce the cost, and to solve the problem of the previous 16U2 hard drive.
24V input can be accepted, and the same system power can reduce the hot bed current to 1/4, effectively solving the hot bed MOS tube heating problem.
Using the open source firmware for Marlin, the configuration is exactly the same as for ramps1.4, and can replace for Ramps1.4 directly.
It can be directly connected to 2004LCD display and 12864LCD display, and can be supported by TFT28 and TFT32 touch screen.
The XYZ axis adopts the terminals of different colors to correspond to the motor and the limit switch, and the connection is convenient.
The humanized design uses different color terminals to distinguish the driving direction, reduces the probability of inserting and reversing, and prevents the main board from being damage by the oppsite inserted of the drive.
The external drive signal is reserved, and the 57 or 86 motor can be driven by a large external drive.
With high quality MOSFET tube, the heat dissipation effect is better and the long time work is stable.
The special power chip is used to support the input of 12V-24V power supply and to solve the problem of heating and insufficient power supply for Ramps voltage conversion chip.
The stable and reliable filter circuit greatly reduces the possibility of interference, and the most likely to avoid the phenomenon of dead machine and running in the printing process.
Package Included:
1 x MKS Gen-L V1.0 Integrated Controller Motherboard
1 x USB Cable
#12/24V #Gen #L #Motherboard #Ramps #[??Y #Printer #V1.0 #1.4 #Board #MKS #Integrated #??]3D #Control #V1.0-Integrated #Motherboard-12/24V #Board-MKS #1.4-Motherb
[??Y ??]3D Printer Control Board MKS Gen L V1.0 Integrated Ramps 1.4 Motherboard 12/24V
Specification:
Brand new
2560 and ramps1.4 are intergrated on a piece of board, which solves the problem of complicated and easy failure for Ramps1.4 composite interface.
Users can change their own motor drive, support 4988 drive and 8825 drive, TMC2100 drive.
Using CH340 serial chip to ensure the stable and reliable premise, reduce the cost, and to solve the problem of the previous 16U2 hard drive.
24V input can be accepted, and the same system power can reduce the hot bed current to 1/4, effectively solving the hot bed MOS tube heating problem.
Using the open source firmware for Marlin, the configuration is exactly the same as for ramps1.4, and can replace for Ramps1.4 directly.
It can be directly connected to 2004LCD display and 12864LCD display, and can be supported by TFT28 and TFT32 touch screen.
The XYZ axis adopts the terminals of different colors to correspond to the motor and the limit switch, and the connection is convenient.
The humanized design uses different color terminals to distinguish the driving direction, reduces the probability of inserting and reversing, and prevents the main board from being damage by the oppsite inserted of the drive.
The external drive signal is reserved, and the 57 or 86 motor can be driven by a large external drive.
With high quality MOSFET tube, the heat dissipation effect is better and the long time work is stable.
The special power chip is used to support the input of 12V-24V power supply and to solve the problem of heating and insufficient power supply for Ramps voltage conversion chip.
The stable and reliable filter circuit greatly reduces the possibility of interference, and the most likely to avoid the phenomenon of dead machine and running in the printing process.
Package Included:
1 x MKS Gen-L V1.0 Integrated Controller Motherboard
1 x USB Cable
#12/24V #Gen #L #Motherboard #Ramps #[??Y #Printer #V1.0 #1.4 #Board #MKS #Integrated #??]3D #Control #V1.0-Integrated #Motherboard-12/24V #Board-MKS #1.4-Motherb