Dây Cáp Điều Khiển Camera Cho Zhiyun Crane 1 / 2 / Plus / M Weebill-S To For Fuji X-T3 X-T2 X-T30 X-T20 X-A3 X-E2
₫ 236.400
Sản phẩm Dây Cáp Điều Khiển Camera Cho Zhiyun Crane 1 / 2 / Plus / M Weebill-S To For Fuji X-T3 X-T2 X-T30 X-T20 X-A3 X-E2 đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Introduction
It connects the stabilizer to specified cameras to control the camera
Lightweight and Durable, easy to carry and store
It may enable the stabilizer to control compatible cameras by GRIP to:
-Take photos
-Start/stop recording video
Note:
When for Weebill-s, it needs to set to: Camera-for S0NY-Off, not support halfway press to focus
When for Crane M/Plus/2, it needs to set your Camera as for PANAS0NIC
Note: Above functions depends on the camera and stabilizer, not our cable. Only 'Take photos' & 'Start/Stop Recording' functions works for some old cameras.
Specification
Color: Black
Material: PVC
Length: About 11.8 inch = 30cm
One End: Micro USB, to be precise: USB Type Micro-B Male
Another End: 2.5mm, same as the plug of RR-100 shutter cable
Manufacturer: third-party, not original from ZHIYUN
How to use
After completing the cable connection, turn on the stabilizer, then turn on the camera.
If the camera is not recognized, restart the camera or remove and reconnect the cable to the camera.
Suitable for
For ZHIYUN Crane, Crane 2, Crane-M, Crane Plus and for WEEBILL-S stabilizer
For fuji cameras with 2.5mm remote port, such as for Fuji X-T3 X-T2 X-T30 X-T20 X-A3 X-E3 XE2, etc.
Not fit to X-S10 X-T200 and X-E4.
Package Include
1 X Control
It connects the stabilizer to specified cameras to control the camera
Lightweight and Durable, easy to carry and store
It may enable the stabilizer to control compatible cameras by GRIP to:
-Take photos
-Start/stop recording video
Note:
When for Weebill-s, it needs to set to: Camera-for S0NY-Off, not support halfway press to focus
When for Crane M/Plus/2, it needs to set your Camera as for PANAS0NIC
Note: Above functions depends on the camera and stabilizer, not our cable. Only 'Take photos' & 'Start/Stop Recording' functions works for some old cameras.
Specification
Color: Black
Material: PVC
Length: About 11.8 inch = 30cm
One End: Micro USB, to be precise: USB Type Micro-B Male
Another End: 2.5mm, same as the plug of RR-100 shutter cable
Manufacturer: third-party, not original from ZHIYUN
How to use
After completing the cable connection, turn on the stabilizer, then turn on the camera.
If the camera is not recognized, restart the camera or remove and reconnect the cable to the camera.
Suitable for
For ZHIYUN Crane, Crane 2, Crane-M, Crane Plus and for WEEBILL-S stabilizer
For fuji cameras with 2.5mm remote port, such as for Fuji X-T3 X-T2 X-T30 X-T20 X-A3 X-E3 XE2, etc.
Not fit to X-S10 X-T200 and X-E4.
Package Include
1 X Control
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000