Đầu Đọc Thẻ Từ 125khz Rfid 26 34 Chống Thấm Nước

Operating Voltage :DC 8V-15V,Support cards: TK4001 EM4100,reader interval :Less than 0.5S
Distance of transmission :WG26/34 greater than or equal to 100M
Format :Wiegand 26/Wiegand 34(Setting by oneself),Status Indication :2PC LED (Blue means standby, Green means reader success)
Read Range :0mm-100mm(related to the card or the environment)
It is a 125KHz contactless access control reader, preclude the use of advanced RF receiver circuit design and embedded micro-controller, combined with efficient decoding algorithms. It has received high sensitivity, current, single DC power supply,high performance characteristics. Dust, moisture, fully sealed design allows users to install the outdoor and other harsh conditions, no mechanical wear and durability.
Consumed Current :0-100mA
Support cards :TK4001/EM4100 etc.
Service Temperature :-25 Celsius~ +75 Celsius
Weight :About 60G
Line definition:
Red: VCC(8V-15V)
Black: GND
White: Wiegand D1
Green: Wiegand D0
Grey: Green light and buzzer long ring
Purple: Wiegand 26/Wiegand 34(The output format is WG34 when purple line connect with black line)
colour:Gray-blue
Material:plastic
size:80*40*12mm
Lead Length :180mm+/-5mm
Package Contents:
1*Ic card reader
Notes:
1. Turn off the power and don't live operation when installing or disassembing
2. The reader must be installed on wooden, concrete or brick wall, or placed on the table. It may not have a large area of iron and steel products within a radius of around 10 centimeters
3. Different cards has affect the distance of reader
4. If the distance of reader between two machines Less than 0.3 m, will interfere with each other. In other words, the best distance between the reader is kept at 0.3 meters above.
5. If the card still in the sensing area, thereader without any prompts, and also don't send data.
6. Access Control Reader cann't store user data and information, we can't increase the card, password and fingerprint user. It's a tool for unlocking that just expanding into the card or password , you need to rely on the access controller, attendance card machines, or multi-door controllers.
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1