Đầu Collet Cnc 40cr Cho Máy Phay Cat40 Er20 2.76in
986.000
₫ 542.300
Sản phẩm Đầu Collet Cnc 40cr Cho Máy Phay Cat40 Er20 2.76in đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 986.000 xuống còn ₫ 542.300, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Welcome to rriioo
We offer the highest discount
Follow us and get coupons
Our shop has a rich variety of products, affordable prices and good quality
Don't miss us, come and buy! ! !
If you have any questions, please contact us
Feature:
1. The clamping range of the CNC tool holder is 1-13mm, and the effective extension length is 2.76in.
2. The clamping accuracy of the tool holder is high, which can ensure the concentricity and balance during processing.
3. The operation is stable and the chip volume is even, and the maximum speed is 8000r/min.
4. Made of 40Cr material, it has toughness and wear resistance, and it is not easy to deform after long-term use.
5. Easy installation and disassembly, stable processing, often used in CNC machining centers.
Specification:
Item Type: CNC Tool Holder
Tool Holder Model: CAT40-ER20-2.76in (CAT40 refers to the tool holder model, ER20 refers to the collet model, 2.76 refers to the effective length of the tool holder is 2.76in)
Tool Holder Material: 40Cr
Maximum Speed: 8000r/min
Tool Holder Accuracy: 0.008mm
Application Scope: CNC machining center
Whether Coating: Coating
Matching Collet: ER20 (not included)
Collet Clamping Range: Approx. 1-13mm / 0-0.5in
Matching Pull Stud Model: 5/8-11UNC (American thread) (not included)
Tool Holder Color: Silver + black
Package List:
1 x CNC Tool Holder
Note:
1. Correctly install the pull stud to the end of the handle before use.
2. The chuck must first be fixed with a nut, insert the tool, and then lock into the knife body.
3. When the tool enters the sleeve hole, the hole must exceed the effective tightening length of the tool to avoid improper locking and dama
We offer the highest discount
Follow us and get coupons
Our shop has a rich variety of products, affordable prices and good quality
Don't miss us, come and buy! ! !
If you have any questions, please contact us
Feature:
1. The clamping range of the CNC tool holder is 1-13mm, and the effective extension length is 2.76in.
2. The clamping accuracy of the tool holder is high, which can ensure the concentricity and balance during processing.
3. The operation is stable and the chip volume is even, and the maximum speed is 8000r/min.
4. Made of 40Cr material, it has toughness and wear resistance, and it is not easy to deform after long-term use.
5. Easy installation and disassembly, stable processing, often used in CNC machining centers.
Specification:
Item Type: CNC Tool Holder
Tool Holder Model: CAT40-ER20-2.76in (CAT40 refers to the tool holder model, ER20 refers to the collet model, 2.76 refers to the effective length of the tool holder is 2.76in)
Tool Holder Material: 40Cr
Maximum Speed: 8000r/min
Tool Holder Accuracy: 0.008mm
Application Scope: CNC machining center
Whether Coating: Coating
Matching Collet: ER20 (not included)
Collet Clamping Range: Approx. 1-13mm / 0-0.5in
Matching Pull Stud Model: 5/8-11UNC (American thread) (not included)
Tool Holder Color: Silver + black
Package List:
1 x CNC Tool Holder
Note:
1. Correctly install the pull stud to the end of the handle before use.
2. The chuck must first be fixed with a nut, insert the tool, and then lock into the knife body.
3. When the tool enters the sleeve hole, the hole must exceed the effective tightening length of the tool to avoid improper locking and dama
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000