Đầu Chuyển Đổi Usb 3.0 Sang M.2 Sata Ssd Cho Raspberry Pi 4


706.199 ₫ 384.387

Sản phẩm Đầu Chuyển Đổi Usb 3.0 Sang M.2 Sata Ssd Cho Raspberry Pi 4 đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 706.199 xuống còn ₫ 384.387, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam

#USB #3.0 #to #M.2 #SATA #SSD #Adapter #for #Argon #ONE #M.2 #Expansion #for #Raspberry #Pi
USB 3.0 to M.2 SATA SSD Adapter for Argon ONE M.2 Expansion for Raspberry Pi 4
Description:
100% brand new and high quality

Specification :
Material : Aluminum (cover and enclosure) + ABS(Base)
Size: 106x96mm/4.17x3.78in
Use for : Raspberry Pi 4 Model B

Features:
Argon ONE M.2 expansion board expands the support for M.2 SATA SSD (solid-state drive) to a high degree
Take advantage of the potential speed of Raspberry Pi 4B. Now you will be able to boot through its M.2 SATA SSD to achieve
Faster boot time and larger storage capacity.
Raspberry Pi 4B uses TF-card to boot by default, which is not as fast as M.2 SSD,now You can connect the M.2 expansion board through the USB interface and use the M.2 solid-state drive as
Main storage: storage drive, which greatly improves the storage read and writes speed of the Raspberry Pi.
Capacity: As the storage capacity of TF cards is limited by volume and manufacturing process, the cost of large-capacity memory cards is high. It is more cost-effective to use TF cards with a storage capacity below 64GB. It is more cost-effective to use M.2 solid-state hard disk for large-capacity storage above 256GB, 512GB, or even 1TB. There are advantages.
To use it, simply replace the bottom of the Argon ONE Case with the expansion board, and the case can now use SSDs. It is recommended to use Raspberry Pi 4 Cases though due to the USB 3.0 ports the boards provide.
Argon ONE M.2 is UASP Supported for the Raspberry Pi 4 which means you can maximize the transfer speeds of your M.2 SATA Drive.
It is compatible with any M.2 SATA SSD with Key-B and Key B&M. ( not for NVME)

Note:
Please allow 1-2cm errors due to manual measurement.
Due to the difference between different monitors, the picture may not reflect the actual color of the item.

Packing List:
1 x M.2 Expansion