(Đang Bán) Bộ Điều Khiển Nhiệt Độ Kỹ Thuật Số Xh-W3002 (110-220V)
174.000
₫ 157.000
Sản phẩm (Đang Bán) Bộ Điều Khiển Nhiệt Độ Kỹ Thuật Số Xh-W3002 (110-220V) đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 174.000 xuống còn ₫ 157.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Product Name: Microcomputer Temperature Controller
Temperature range: -50-110℃; Temperature control range: -50-110℃; Temperature measurement accuracy: +-0.2℃; Temperature control accuracy: +-0.1℃; Temperature probe: NTC10K (B3950) 1 meter waterproof probe
Supply voltage: DC12V/DC24V/AC220V; Output power: DC12V: 120W/DC24V: 240W/AC220V: 1500W
Output type: direct output
Opening size: 73mm (aperture 4mm)
Key Description:Up key:Short press to display the starting temperature,long press to set the starting temperature.Down button:short press to display the stop temperature,long press to set the stop temperature.Shutdown button:Press to turn off the thermostat,and then press to turn on the thermostat.
P0.Set the startup temperature:Press the Setup button to enter the internal menu.The default display is P0.Press the Setup button again and set the desired startup temperature by pressing the up and down buttons.
P1.Set the stop temperature:Press the setup button to enter the internal menu,the display is P0,switch to P1 by the up and down keys,press the setup button again,and set the required stop temperature by the up and down buttons.
P2.Set the temperature correction:In the same way, enter the internal menu,switch to P2 by pressing the up and down buttons,press the setting button again,and set the required calibration temperature by pressing the up and down buttons.(Note: In the setting,if the detected temperature value is 0.5℃ larger than the actual temperature value, then the calibration temperature to be set is -0.5℃.If the detected value is 1℃ smaller than the actual temperature value,the set calibration temperature is required.It is 1℃. Detection temperature+correction temperature=actu)
colour: gray
Material: ABS+electronic components
size: 73x45x60mm
Package Contents:
2 x Microcomputer Temperature Controller
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
Temperature range: -50-110℃; Temperature control range: -50-110℃; Temperature measurement accuracy: +-0.2℃; Temperature control accuracy: +-0.1℃; Temperature probe: NTC10K (B3950) 1 meter waterproof probe
Supply voltage: DC12V/DC24V/AC220V; Output power: DC12V: 120W/DC24V: 240W/AC220V: 1500W
Output type: direct output
Opening size: 73mm (aperture 4mm)
Key Description:Up key:Short press to display the starting temperature,long press to set the starting temperature.Down button:short press to display the stop temperature,long press to set the stop temperature.Shutdown button:Press to turn off the thermostat,and then press to turn on the thermostat.
P0.Set the startup temperature:Press the Setup button to enter the internal menu.The default display is P0.Press the Setup button again and set the desired startup temperature by pressing the up and down buttons.
P1.Set the stop temperature:Press the setup button to enter the internal menu,the display is P0,switch to P1 by the up and down keys,press the setup button again,and set the required stop temperature by the up and down buttons.
P2.Set the temperature correction:In the same way, enter the internal menu,switch to P2 by pressing the up and down buttons,press the setting button again,and set the required calibration temperature by pressing the up and down buttons.(Note: In the setting,if the detected temperature value is 0.5℃ larger than the actual temperature value, then the calibration temperature to be set is -0.5℃.If the detected value is 1℃ smaller than the actual temperature value,the set calibration temperature is required.It is 1℃. Detection temperature+correction temperature=actu)
colour: gray
Material: ABS+electronic components
size: 73x45x60mm
Package Contents:
2 x Microcomputer Temperature Controller
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000