Cuộn Phim Chụp Ảnh Kích Thước 30cm 1m Chuyên Dụng
78.900
₫ 48.100
Sản phẩm Cuộn Phim Chụp Ảnh Kích Thước 30cm 1m Chuyên Dụng đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 78.900 xuống còn ₫ 48.100, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Features:
Universal used in producing PCB board,attach on the PCB surface to make it photosensitive.
Suitable for electroplating, hole coveringand etching.
Great hole covering ability.
High resolution.
Great adaptive capacity to differentmaterial.
Durable in pH 8.0-8.5 situation.
1.5mil dry film fully covers a 0.25inchheight hole.
Suitable for usual plating bath, no wrinkleor color error.
Specification:
Width: approx. 30 cm/11.81"
Length: approx. 100 cm/39.37"
OperatingSteps:
-Remove the cover.
-Clean the surface, then attachthe film carefully, be sure to make it flat and leave no air.
-Iron the film slightly to fixit.
-Print the PCB film to ensureprecision, or use parchment paper instead.
-Put the printed pattern on thephotosensitive board to expose. The dry film will turn into deep blue fromlight blue.
-Develop: Remove another film,put it into developer water. Wipe the board when developing. (1 developerwater: 100 water)
-Etch.
-Demould after etching isfinished. Put the board into demoulding water for several minutes. (1demoulding water: 60/70 water)
Included:
1 X Photosensitive Dry
Universal used in producing PCB board,attach on the PCB surface to make it photosensitive.
Suitable for electroplating, hole coveringand etching.
Great hole covering ability.
High resolution.
Great adaptive capacity to differentmaterial.
Durable in pH 8.0-8.5 situation.
1.5mil dry film fully covers a 0.25inchheight hole.
Suitable for usual plating bath, no wrinkleor color error.
Specification:
Width: approx. 30 cm/11.81"
Length: approx. 100 cm/39.37"
OperatingSteps:
-Remove the cover.
-Clean the surface, then attachthe film carefully, be sure to make it flat and leave no air.
-Iron the film slightly to fixit.
-Print the PCB film to ensureprecision, or use parchment paper instead.
-Put the printed pattern on thephotosensitive board to expose. The dry film will turn into deep blue fromlight blue.
-Develop: Remove another film,put it into developer water. Wipe the board when developing. (1 developerwater: 100 water)
-Etch.
-Demould after etching isfinished. Put the board into demoulding water for several minutes. (1demoulding water: 60/70 water)
Included:
1 X Photosensitive Dry
Sản Phẩm Liên Quan
HOT
HOT