Cuộn film cảm quang 30cm x 1M
₫ 34.800
Sản phẩm Cuộn film cảm quang 30cm x 1M đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
welcome to sunshine33.vn
Cuộn film cảm quang 30cm x 1M
Features:
Universal used in producing PCB board, attach on the PCB surface to make it photosensitive.
Suitable for electroplating, hole covering and etching.
Great hole covering ability.
High resolution.
Great adaptive capacity to different material.
Durable in pH 8.0-8.5 situation.
1.5mil dry film fully covers a 0.25inch height hole.
Suitable for usual plating bath, no wrinkle or color error.
Specification:
Width: approx. 30 cm/11.81"
Length: approx. 100 cm/39.37"
Operating Steps:
1. Remove the cover.
2. Clean the surface, then attach the film carefully, be sure to make it flat and leave no air.
3. Iron the film slightly to fix it.
4. Print the PCB film to ensure precision, or use parchment paper instead.
5. Put the printed pattern on the photosensitive board to expose. The dry film will turn into deep blue from light blue.
6. Develop: Remove another film, put it into developer water.
Wipe the board when developing. (1 developer water: 100 water)
7. Demould after etching is finished. Put the board into demoulding water for several minutes. (1 demoulding water: 60/70 water)
Included:
1 X Photosensitive Dry Film
#quang #Cuộn #x #film #cảm #30cm #1M #Cuộn-film #x-1M #quang-30cm #cảm-quang #film-cảm #30cm-x #Cuộn-film-cảm #film-cảm-quang #quang-30cm-x #cảm-quang-30cm #30cm-
Cuộn film cảm quang 30cm x 1M
Features:
Universal used in producing PCB board, attach on the PCB surface to make it photosensitive.
Suitable for electroplating, hole covering and etching.
Great hole covering ability.
High resolution.
Great adaptive capacity to different material.
Durable in pH 8.0-8.5 situation.
1.5mil dry film fully covers a 0.25inch height hole.
Suitable for usual plating bath, no wrinkle or color error.
Specification:
Width: approx. 30 cm/11.81"
Length: approx. 100 cm/39.37"
Operating Steps:
1. Remove the cover.
2. Clean the surface, then attach the film carefully, be sure to make it flat and leave no air.
3. Iron the film slightly to fix it.
4. Print the PCB film to ensure precision, or use parchment paper instead.
5. Put the printed pattern on the photosensitive board to expose. The dry film will turn into deep blue from light blue.
6. Develop: Remove another film, put it into developer water.
Wipe the board when developing. (1 developer water: 100 water)
7. Demould after etching is finished. Put the board into demoulding water for several minutes. (1 demoulding water: 60/70 water)
Included:
1 X Photosensitive Dry Film
#quang #Cuộn #x #film #cảm #30cm #1M #Cuộn-film #x-1M #quang-30cm #cảm-quang #film-cảm #30cm-x #Cuộn-film-cảm #film-cảm-quang #quang-30cm-x #cảm-quang-30cm #30cm-
Sản Phẩm Liên Quan
HOT
Đĩa thổi khí thô SSI AFC75
₫ 220.000
HOT
Máy thổi Makita UB1103
₫ 1.600.000
HOT
van phao nước bóng inox
₫ 70.000
HOT
HOT
[Có sẵn] Xịt bảo vệ cho tranh và màu vẽ
₫ 110.000
HOT
ĐẦU LỌC NƯỚC TẠI VÒI
₫ 30.000