Cuộn Dây Nhựa Abs 1.75mm 10m Cho Máy In 3d
18.429
₫ 12.578
Sản phẩm Cuộn Dây Nhựa Abs 1.75mm 10m Cho Máy In 3d đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 18.429 xuống còn ₫ 12.578, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Specifications:
100% Brand New with High Quality.
Our Thermoplastic 3D Filaments are made from the best materials available and have been thoroughly tested for the best possible results.
ABS and PLA Materials are extruded with great precision, meaning better looking prints, less calibration and fewer extruder failures.
The materials will work flawlessly with most 3D extruder' currently in the market.
1.Material: ABS
Diameter: 1.75mm
Length: 10m
Color: As Pictures Shows
Material ABS
Density 1.25g±0.05g/cm³
Melting Point 200℃
Tensile Strength ≥60MPa
Bending Strength ≥60MPa
Notch Impack Strength 22.11kg/㎡
Distortion Temperature 105℃
Best Printing Heat
210-240℃
2.Material: PLA
Diameter: 1.75mm
Length: 10m
Color: As Pictures Shows
Material PLA
Density 1.25g±0.05g/cm³
Melting Point 180℃
Tensile Strength ≥60MPa
Bending Strength ≥60MPa
Notch Impack Strength 22.11kg/㎡
Distortion Temperature 60℃
Best Printing Heat 190-210℃
Note:
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thanks for your attention!
Package:
10m 3D Printer Filament
100% Brand New with High Quality.
Our Thermoplastic 3D Filaments are made from the best materials available and have been thoroughly tested for the best possible results.
ABS and PLA Materials are extruded with great precision, meaning better looking prints, less calibration and fewer extruder failures.
The materials will work flawlessly with most 3D extruder' currently in the market.
1.Material: ABS
Diameter: 1.75mm
Length: 10m
Color: As Pictures Shows
Material ABS
Density 1.25g±0.05g/cm³
Melting Point 200℃
Tensile Strength ≥60MPa
Bending Strength ≥60MPa
Notch Impack Strength 22.11kg/㎡
Distortion Temperature 105℃
Best Printing Heat
210-240℃
2.Material: PLA
Diameter: 1.75mm
Length: 10m
Color: As Pictures Shows
Material PLA
Density 1.25g±0.05g/cm³
Melting Point 180℃
Tensile Strength ≥60MPa
Bending Strength ≥60MPa
Notch Impack Strength 22.11kg/㎡
Distortion Temperature 60℃
Best Printing Heat 190-210℃
Note:
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thanks for your attention!
Package:
10m 3D Printer Filament
Sản Phẩm Liên Quan
HOT
ỐNG MỰC NHẬT BẢN
₫ 11.000
HOT
Dây máy in 5m xanh
₫ 28.000
HOT
HOT
MOTER RS 385 12V , TRỤC D 2.3MM
₫ 20.000