Công Tắc Đèn Gắn Tường Thông Minh 2 Nút Xiaomi Mijia

Specification:
Product name : Xiaomi Mijia Wall Switch
A: single open double control
B: double open double control
C: Triple open double control
Product size : 86x 86 X 39mm
Product color : white
Installation hole distance : 60mm
Rated current : 16AX
Rated voltage : 250V
Operating temperature : -10°C~40°C

Package Included :
1x Xiaomi Mijia Wall Switch
1x Introduction Manual

When the switch switches to”traditional rocker mode", it can
control any non-intelligent lamps in the home, which can be
turned on and off by pressing gently.
Switch to traditional rocker mode, use light in the home without worry

Safe use of electricity Xiaomi Mijia wall switch external power on/power off knob
When the switch is in the self rebound mode, press and hold the top of the panel, and at the same time move the power on/power off knob, the switch will remain in the state of normal power on or power off; and no longer worry about safety and power consumption when going out.

Switch self-rebound mode
Single open single control
FireWire
* Take off the power cord by 10-1 2mm, loosen the terminal screws above the wiring holes L1 and L12, and then insert the input hot wire and the lamp input hot wire into the wiring holes marked with L1 and L12 at the rear of the switch in order. Tighten the terminal screws with a flat- blade screwdriver.

Three open single control
FireWire
* Take off the power cord by 10- 12mm. After confirming that the switch mode is the traditional Xiaoban mode, unscrew the terminal screws markedL1,L12, L2, L22, L3, L32 on the back of the switch, and then connect the input live wire. The wiring holes marked L1, L2.L3, the input live wire of luminaire 1, the input live wire of luminaire 2 and the input hot wire of luminaire 3 are connected to the connection holes marked L12, L22, L32 in sequence, and the terminal screw can be tightened with a flat- blade screwdriver .
Three open dual control

Single open and double control
Double open single control
* Take off the power cord by 10-12mm. After confirming that the switch mode is the rebound mode, loosen the terminal screws marked with L1, L12, L2, and L22 at the back of the switch, and then connect the input live wire toL1 and L2. Numbered wiring holes, the input live wire of lamp 1 and the input hot wire of lamp 2 are connected to the connec- tion holes of L12 and L22 in sequence, and then the terminal screw can be tightened with a flat- blade screwdriver.

Double open and double control
Three open single control

Double open single control
★Take off the power cord 10-12mm. After confirming that the switch mode is the traditional seesaw mode, loosen the terminal screws marked withL1,L11,L2, and L2 on the back of the switch, and then connect the input live wire to L1. The L2 numbered wiring hole of the lamp 1 input fire wire and the lamp 2 input fire wire are connected to the L21.L11 numbered wiring hole in order, and then the terminal screw can be tightened with a flat-blade screwdr