Công Tắc Cảm Biến Dòng Chảy Tự Động 1 / 2 Sang 3 / 4 220v
186.400
₫ 93.200
Sản phẩm Công Tắc Cảm Biến Dòng Chảy Tự Động 1 / 2 Sang 3 / 4 220v đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 186.400 xuống còn ₫ 93.200, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
[haostont]1/2 to 3/4 Thread Connector Booster pump Automatic Water Flow Sensor Switch 220VSpecification:
Brand new
Power: 120W
Voltage: AC220V
Current: 0.5A
Water temperature range: ≤100℃
Pressure: ≤0.6Mpa
Female port thread dia: OD: approx.29mm, ID: approx.25mm, hole: approx.13mm
Male thread (fit pipe dia): OD: 20mm, ID: approx.12mm
Body size: approx.67*50*35mm
Cable length: approx.26cm
Feature:
Durable and practical.
Stable and safe.
High temperature, low water pressure start.
Detect whether the water flow line and traffic is to meet the requirements, at the same time by switching electrical contacts provide a signal output ON or OFF state.
Equipment system by detecting the presence of a signal or a control current to pass therethrough (flow switch electrical contacts pass, off state) on the switch to determine the working status of the piping system.
Principle:
When the water flow in the pipe is more than 0.75L/min, the core displacement under the action of water and promote the role of the source generates sensor outputs "1" switching signal, the signal input to the device control system, by expanding the power amplification to achieve the purpose of the water flow control.
When the pipe in the water flow is less than 0.75L / min flow rate, the core source drive return under the action of the reset spring force, so that the sensor outputs "0" switch signal to stop operation of the system.
Package included:
1 x water flow sensor switch
Note:
Please allow 1-2cm errors due to manual measurement.
Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated
Brand new
Power: 120W
Voltage: AC220V
Current: 0.5A
Water temperature range: ≤100℃
Pressure: ≤0.6Mpa
Female port thread dia: OD: approx.29mm, ID: approx.25mm, hole: approx.13mm
Male thread (fit pipe dia): OD: 20mm, ID: approx.12mm
Body size: approx.67*50*35mm
Cable length: approx.26cm
Feature:
Durable and practical.
Stable and safe.
High temperature, low water pressure start.
Detect whether the water flow line and traffic is to meet the requirements, at the same time by switching electrical contacts provide a signal output ON or OFF state.
Equipment system by detecting the presence of a signal or a control current to pass therethrough (flow switch electrical contacts pass, off state) on the switch to determine the working status of the piping system.
Principle:
When the water flow in the pipe is more than 0.75L/min, the core displacement under the action of water and promote the role of the source generates sensor outputs "1" switching signal, the signal input to the device control system, by expanding the power amplification to achieve the purpose of the water flow control.
When the pipe in the water flow is less than 0.75L / min flow rate, the core source drive return under the action of the reset spring force, so that the sensor outputs "0" switch signal to stop operation of the system.
Package included:
1 x water flow sensor switch
Note:
Please allow 1-2cm errors due to manual measurement.
Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated