Công Tắc Cảm Biến Dòng Chảy Stxii Fs-1 / 2-nylon G1 / 2in Male / Female
74.000
₫ 41.000
Sản phẩm Công Tắc Cảm Biến Dòng Chảy Stxii Fs-1 / 2-nylon G1 / 2in Male / Female đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 74.000 xuống còn ₫ 41.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Feature:
1. The flow switch is a sensor device that converts water flow into a switch-type electrical signal when a certain flow is reached
2. The flow switch consists of magnetic core, return spring, wrought copper or polycarbon housing and sensor
3. The shell is made of H58 forged copper or polycarbon, the magnetic core is made of NdFeB permanent magnet material, and the sensor magnetic control switch is an imported medium power component
4. The inlet and outlet ports are G1 / 2in standard pipe threads, which is convenient for connection
5. The flow switch has the advantages of high sensitivity and strong durability.
Specification:
Item Type: Plastic Water Flow Sensor SwitchModel: Fs-1 / 2-nylon
Interface Thread Size: Male/Female threads are G1/2in
Material: Nylon
Working Voltage: DC0-110V
Working Current: 0.5-1A
Medium Specific Gravity: 0.7
Signal Output Load: DC24V/0.5A, 36V/0.5A
Suitable Ambient Temperature: ≥1℃
Suitable Working Temperature: ≤100℃
Minimum Starting Flow: ≥0.75L/min
Maximum Throughput: ≤5L/min
Rated Working Pressure: ≤0.65Mpa
Maximum Pressure of The Shell: ≤1.5MpaLength: Approx. 64mm / 2.5in
Working Principle: When the water flow in the pipeline is greater than 0.75L/min, the magnetic core is displaced under the action of the water flow and drives the magnetic source to generate a magnetron effect to cause the sensor to output a "1" switching signal, which is input to the equipment control system , After power amplification, the purpose of water flow control is achieved. When the water flow in the pipeline is less than 0.75L / min, the magnetic core will drive the magnetic source back under the force of the return spring, so that the sensor outputs a "0" switching signal to stop the system
Adaptation and Conditions:
(1) The ambient temperature is not lower than 0℃. Do not knock on the case. Keep away from magnetic objects
(2) The output of the signal is a switch value, so the connection method of the control object must also be a switch control relationship.
(3) The power of the control object must not be greater than the signal load capacity
(4) This device is a water medium control device and cannot be used for other medium control.
Package List:
1 x Plastic Water Flow Sensor S
1. The flow switch is a sensor device that converts water flow into a switch-type electrical signal when a certain flow is reached
2. The flow switch consists of magnetic core, return spring, wrought copper or polycarbon housing and sensor
3. The shell is made of H58 forged copper or polycarbon, the magnetic core is made of NdFeB permanent magnet material, and the sensor magnetic control switch is an imported medium power component
4. The inlet and outlet ports are G1 / 2in standard pipe threads, which is convenient for connection
5. The flow switch has the advantages of high sensitivity and strong durability.
Specification:
Item Type: Plastic Water Flow Sensor SwitchModel: Fs-1 / 2-nylon
Interface Thread Size: Male/Female threads are G1/2in
Material: Nylon
Working Voltage: DC0-110V
Working Current: 0.5-1A
Medium Specific Gravity: 0.7
Signal Output Load: DC24V/0.5A, 36V/0.5A
Suitable Ambient Temperature: ≥1℃
Suitable Working Temperature: ≤100℃
Minimum Starting Flow: ≥0.75L/min
Maximum Throughput: ≤5L/min
Rated Working Pressure: ≤0.65Mpa
Maximum Pressure of The Shell: ≤1.5MpaLength: Approx. 64mm / 2.5in
Working Principle: When the water flow in the pipeline is greater than 0.75L/min, the magnetic core is displaced under the action of the water flow and drives the magnetic source to generate a magnetron effect to cause the sensor to output a "1" switching signal, which is input to the equipment control system , After power amplification, the purpose of water flow control is achieved. When the water flow in the pipeline is less than 0.75L / min, the magnetic core will drive the magnetic source back under the force of the return spring, so that the sensor outputs a "0" switching signal to stop the system
Adaptation and Conditions:
(1) The ambient temperature is not lower than 0℃. Do not knock on the case. Keep away from magnetic objects
(2) The output of the signal is a switch value, so the connection method of the control object must also be a switch control relationship.
(3) The power of the control object must not be greater than the signal load capacity
(4) This device is a water medium control device and cannot be used for other medium control.
Package List:
1 x Plastic Water Flow Sensor S
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000