Công Nghệ Hiển Thị Tốc Độ P10 2.2 Inch Obd 2 Hud Cho Máy Tính
₫ 990.600
Sản phẩm Công Nghệ Hiển Thị Tốc Độ P10 2.2 Inch Obd 2 Hud Cho Máy Tính đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Thanks for purchasing our OBD smart digital device.This product connects car OBD2 interface by OBD cable, and dispaly the driving datas, e.g. vehicle speed, engine RPM, water temperature, fuel consumption etc. It can keep the driver’s eyes always on road to avoid the dangerous of lowering down head to read the dashboard. This product won’t change any car ECU datas.
OBD smart digital device is equipped with a very powerful detection for error code, the device can display the error code information clearly in text form,and it can clear the fault information,and display accelerating competitive mode,brake performance test mode, read the entire vehicle data stream information,and the other functions.
Main Functions&Features:
1.Available for cars with OBD2 and EUOBD port(Car automatic diagnosis system) ,plug and play
2.TFT LCD multi color smart display
3.The first scan will show the vehicle protocol
4.The language can be changed
5.Multi function display mode or simple function display mode can be switched freely
6.Add new functions: accelerating competitive mode ,Brake performance test, can read the entire car data stream information
7. Rich Contents:vehicle speed,engine RPM,water temperature,voltage,instantaneous fuel consumption,average fuel consumption,driving distance measurement,driving time ,low voltage alarm,high water temperature alarm,over speed alarm, engine fault code alarm, eliminate the fault code,freely switch between kilometers&miles.
Key functions
1.Setting button:it can push left / right, short / long press in
2.Light sensor
3.OBD interface
Setting button functions
1. Short press in:(1) switch the display mode (2)confirm the menu after enter into the menu
2. Push left:(1)switch the left area functions(2)change the function setting after enter into the menu
3. Push right:(1)switch the right area functions(2)change the function setting after enter into the menu
4. Long press in:after enter into the menu and finish the setting,long press in for 5 seconds to keep and exit.
Push left/right to switch function:
Below are function abbreviations
ECT-engine coolant temperature VLT-Voltage FUE-fuel consumption
RPM- Revolutions Per minute ODO-odometer
TIM-single driving time DIS-single driving distance
Technical Parameters:
Environment temperature: -40c- + 80c
atmospheric pressure 86-106KPa
Relative Humidity: 10% -95%
environmental noise <= 60dB (A)
Alarm sound level: 》=30dB (A)
Working voltage: 9V ~ 16Vdc (12Vdc / 400mA)
Product size: 73*68*46(cm)
Product Weight: 50
OBD smart digital device is equipped with a very powerful detection for error code, the device can display the error code information clearly in text form,and it can clear the fault information,and display accelerating competitive mode,brake performance test mode, read the entire vehicle data stream information,and the other functions.
Main Functions&Features:
1.Available for cars with OBD2 and EUOBD port(Car automatic diagnosis system) ,plug and play
2.TFT LCD multi color smart display
3.The first scan will show the vehicle protocol
4.The language can be changed
5.Multi function display mode or simple function display mode can be switched freely
6.Add new functions: accelerating competitive mode ,Brake performance test, can read the entire car data stream information
7. Rich Contents:vehicle speed,engine RPM,water temperature,voltage,instantaneous fuel consumption,average fuel consumption,driving distance measurement,driving time ,low voltage alarm,high water temperature alarm,over speed alarm, engine fault code alarm, eliminate the fault code,freely switch between kilometers&miles.
Key functions
1.Setting button:it can push left / right, short / long press in
2.Light sensor
3.OBD interface
Setting button functions
1. Short press in:(1) switch the display mode (2)confirm the menu after enter into the menu
2. Push left:(1)switch the left area functions(2)change the function setting after enter into the menu
3. Push right:(1)switch the right area functions(2)change the function setting after enter into the menu
4. Long press in:after enter into the menu and finish the setting,long press in for 5 seconds to keep and exit.
Push left/right to switch function:
Below are function abbreviations
ECT-engine coolant temperature VLT-Voltage FUE-fuel consumption
RPM- Revolutions Per minute ODO-odometer
TIM-single driving time DIS-single driving distance
Technical Parameters:
Environment temperature: -40c- + 80c
atmospheric pressure 86-106KPa
Relative Humidity: 10% -95%
environmental noise <= 60dB (A)
Alarm sound level: 》=30dB (A)
Working voltage: 9V ~ 16Vdc (12Vdc / 400mA)
Product size: 73*68*46(cm)
Product Weight: 50
Sản Phẩm Liên Quan
HOT