Con Quay Hồi Chuyển Vô Tuyến Radiolink New R4Fgm 4ch Rc4Gs / Rc6Gs / / Rc4G / T8Fb / T8S Cho Tàu Thuyền
992.500
₫ 498.800
Sản phẩm Con Quay Hồi Chuyển Vô Tuyến Radiolink New R4Fgm 4ch Rc4Gs / Rc6Gs / / Rc4G / T8Fb / T8S Cho Tàu Thuyền đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 992.500 xuống còn ₫ 498.800, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Radiolink is a high technology manufacturing company dedicated to researching, manufacturing and marketing of RC model radio transmitters. Our products included: RC transmitter, flight controller, receiver, GPS, drone etc. We are committed to providing customers with a high reliability and high performance product solution, as well as providing technical support and friendly after-sales service.
Description:
Item type:R4FGM Receiver
How to Match Code With Transmitter:
-Put the transmitter and the receiver close to each other within 50 cm.
-Turn on the transmitter, then power on the R8F.
-There is a ID SET on the R8F, press the binding button in one second until the receiver light starts blinking and release, after about 8 times blinking, match code success when receiver signal LED always on.
R8F 8CH Receiver Specifications:
Channels: 8ch
Signal output: PPM/PWM/S-BUS, 2.4GHz
Modulation Mode: GFSK
Antenna Length: 200mm
Control Distance: 1900m on the ground
Power Supply: 4.8v-10v DC
RF Power: <10dbm
Channel resolution: 4096
Working Current: 30mA
Size: 34*21*11.5mm
Weight: 6.5g
Model Application: Car/boat/Fixed wing/Glider/Multirotor
Compatible transmitter: RC6GS(3-position switch version), RC4GS (version with P.D after 2018.01) /T8FB/T8S
Reverse Polarity Protection: Even the polarities are mistakenly connected which not damaged. Support 4.8~10V high voltage servo.
Subsidiary ID Specifies Control: Can be specified in 10 ID coded receivers, you can select one of the boats to rescue when the one boat cannot move on the water. (Ensure all of your receivers are R8F)
Packing list:
R4FGM Receiver x 1
Notes:
(RC6GS-V6.0.0 firmware (Compatible with RC6GS 3-position(5-6CH) switch version ONLY)
(RC4GS-V6.0.1 firmware (Compatible with RC4GS produced After Jan. 1, 2018
Description:
Item type:R4FGM Receiver
How to Match Code With Transmitter:
-Put the transmitter and the receiver close to each other within 50 cm.
-Turn on the transmitter, then power on the R8F.
-There is a ID SET on the R8F, press the binding button in one second until the receiver light starts blinking and release, after about 8 times blinking, match code success when receiver signal LED always on.
R8F 8CH Receiver Specifications:
Channels: 8ch
Signal output: PPM/PWM/S-BUS, 2.4GHz
Modulation Mode: GFSK
Antenna Length: 200mm
Control Distance: 1900m on the ground
Power Supply: 4.8v-10v DC
RF Power: <10dbm
Channel resolution: 4096
Working Current: 30mA
Size: 34*21*11.5mm
Weight: 6.5g
Model Application: Car/boat/Fixed wing/Glider/Multirotor
Compatible transmitter: RC6GS(3-position switch version), RC4GS (version with P.D after 2018.01) /T8FB/T8S
Reverse Polarity Protection: Even the polarities are mistakenly connected which not damaged. Support 4.8~10V high voltage servo.
Subsidiary ID Specifies Control: Can be specified in 10 ID coded receivers, you can select one of the boats to rescue when the one boat cannot move on the water. (Ensure all of your receivers are R8F)
Packing list:
R4FGM Receiver x 1
Notes:
(RC6GS-V6.0.0 firmware (Compatible with RC6GS 3-position(5-6CH) switch version ONLY)
(RC4GS-V6.0.1 firmware (Compatible with RC4GS produced After Jan. 1, 2018