COD☭3S 40A BMS Pro 11.1V 12.6V 18650 Great Lithium Battery Protection Board with Balanced
84.000
₫ 60.032
Sản phẩm COD☭3S 40A BMS Pro 11.1V 12.6V 18650 Great Lithium Battery Protection Board with Balanced đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 84.000 xuống còn ₫ 60.032, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Welcome to #domybestshop
You can find all kinds of products here!
Come and shop fun together
Specification:
Product model: HW-288
Charging Voltage: DC 12.6V-13.6V
Continuous discharge current: maximum 40A (if heat dissipation environment is not good, please reduce the use of load current)
Continuous charging current: maximum 20A
Applicable Choice: For lithium batteries with nominal voltage of 3.7V and charge of 4.2V (including 18650, 26650 and polymer lithium batteries), with electric drill below 170W.
Product size: 60mm*40mm*2mm/2.36*1.57*0.07''
Packing weight: 12g
Warm Tips:
1. Successful start-up of the drill requires four 10℃-20℃ power batteries, eight 5℃-10℃ power batteries, 0 V and 14.4V connections, using copper wires of more than 3 square millimeters.
2. Connect 0V, 3.6V. 7.2V, 10.8V, 14.4V strictly according to the figure. When welding the wire, you can't touch any components on the board, and don't intentionally short circuit.
3. When welding batteries or charging, as long as a single battery exceeds 3.6V, * 360 "resistance will heat and discharge (discharge to 3.59V or so stops heating). If the "360" resistor is heated seriously (too hot to touch), please check whether the wrong connection is made and whether the wrong 4.2V battery is used.
Note:
Please allow 1-3mm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.
Included:
1 X 18650 Lithium Battery Protection
You can find all kinds of products here!
Come and shop fun together
Specification:
Product model: HW-288
Charging Voltage: DC 12.6V-13.6V
Continuous discharge current: maximum 40A (if heat dissipation environment is not good, please reduce the use of load current)
Continuous charging current: maximum 20A
Applicable Choice: For lithium batteries with nominal voltage of 3.7V and charge of 4.2V (including 18650, 26650 and polymer lithium batteries), with electric drill below 170W.
Product size: 60mm*40mm*2mm/2.36*1.57*0.07''
Packing weight: 12g
Warm Tips:
1. Successful start-up of the drill requires four 10℃-20℃ power batteries, eight 5℃-10℃ power batteries, 0 V and 14.4V connections, using copper wires of more than 3 square millimeters.
2. Connect 0V, 3.6V. 7.2V, 10.8V, 14.4V strictly according to the figure. When welding the wire, you can't touch any components on the board, and don't intentionally short circuit.
3. When welding batteries or charging, as long as a single battery exceeds 3.6V, * 360 "resistance will heat and discharge (discharge to 3.59V or so stops heating). If the "360" resistor is heated seriously (too hot to touch), please check whether the wrong connection is made and whether the wrong 4.2V battery is used.
Note:
Please allow 1-3mm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.
Included:
1 X 18650 Lithium Battery Protection
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000