Chuông cửa không dây Cacazi TK01 60 tông nhạc chuông chống nước IP44 300M điều khiển từ xa cao cấp
₫ 814.600
Sản phẩm Chuông cửa không dây Cacazi TK01 60 tông nhạc chuông chống nước IP44 300M điều khiển từ xa cao cấp đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
NO:HY201910000C57
Features and specifications:
-Press the button, super learning code can freely learn to match, can be unlimited matching receiver.
-The transmitter without screw chuck design to achieve waterproof and dustproof.
-The doorbell button usea 23A12V battery (battery included) and the receiver voltage is 220v.
-The receiver is a distance of 300 meters (in an open area), which may be affected by the environment and obstacles.
-The receiver has 36ringtones to choose from, and the volume is 20-80db in 4 levels.
-Transmitter size:80*45*22mm
-Receiver size:90*65*28mm
-Just plug the receiver into an electrical outlet,the push button transmitter can be stick it to the door with provided adhesive tapes.
The doorbell can use in the office, home, hospital, factory, restaurant or anywhere need it.
Note:
The button cannot be placed on an iron door because it will interfere with the signal.
If the receiver does not ring when you press the button after you receive the doorbell, check the following steps:
-If the button has a battery installed, it requires an alkaline battery of 23A12V.
-You can pair the button with the receiver.
How to pair signals
Pairing method: Press and hold the music button on the receiver, then keep pressing the transmitter, about 4 seconds, the signal is successfully paired.
Music settings:
Select the desired music, press and hold the receiver volume button for 3 seconds, when the receiver light is on for a long time, release the volume button, press the transmitter button, and the pairing is succes
Features and specifications:
-Press the button, super learning code can freely learn to match, can be unlimited matching receiver.
-The transmitter without screw chuck design to achieve waterproof and dustproof.
-The doorbell button usea 23A12V battery (battery included) and the receiver voltage is 220v.
-The receiver is a distance of 300 meters (in an open area), which may be affected by the environment and obstacles.
-The receiver has 36ringtones to choose from, and the volume is 20-80db in 4 levels.
-Transmitter size:80*45*22mm
-Receiver size:90*65*28mm
-Just plug the receiver into an electrical outlet,the push button transmitter can be stick it to the door with provided adhesive tapes.
The doorbell can use in the office, home, hospital, factory, restaurant or anywhere need it.
Note:
The button cannot be placed on an iron door because it will interfere with the signal.
If the receiver does not ring when you press the button after you receive the doorbell, check the following steps:
-If the button has a battery installed, it requires an alkaline battery of 23A12V.
-You can pair the button with the receiver.
How to pair signals
Pairing method: Press and hold the music button on the receiver, then keep pressing the transmitter, about 4 seconds, the signal is successfully paired.
Music settings:
Select the desired music, press and hold the receiver volume button for 3 seconds, when the receiver light is on for a long time, release the volume button, press the transmitter button, and the pairing is succes