Chiết áp kế điện tử ống đơn 22-32cm bằng chất liệu TPU Nylon có vòng đệm cho người lớn

CF1801BK-A Adult Electronic Hemodynamometer cuff with hoop, Black,22-32cm,with bladder,single tube
CF1801R Adult Electronic Hemodynamometer cuff with hoop, RED ,22-32cm,with bladder,single tube
CF1801Y Adult Electronic Hemodynamometer cuff with hoop, Yellow ,22-32cm,with bladder,single tube
CF1801GN Adult Electronic Hemodynamometer cuff with hoop, Green,22-32cm,with bladder,single tube
CF1801HB Adult Electronic Hemodynamometer cuff with hoop,Sky Blue,22-32cm,with bladder,single tube
CF1801V Adult Electronic Hemodynamometer cuff with hoop, Violet,22-32cm,with bladder,single tube
CF1801N Adult Electronic Hemodynamometer cuff with hoop, Dark Blue,22-32cm,with bladder,single tube

Please indicate the color when placing the order

Instructions for use
1. Select appropriate blood pressure measurement site. Because normative values are generally based on this site and as a matter of convenience, upper arm is preferred. When upper arm size or shape or patient’s care accordingly, taking into account the patient’s cardiovascular status and the effect of alternative site on blood pressure values, proper cuff size and comfort.
If patient is standing, sitting, or inclined ensure that cuffed limb is supported to maintain cuff at level of patient’s heart. If cuff is not at heart level, the difference in systolic and
Diastolic values due to hydrostatic effect must be considered.
2. Select appropriate cuff. Check manufacturer’s Instructions for use for measurement device to ensure compatibility with cuff. When using cuff with non-invasive blood pressure monitor, ensure that monitor operates in desired mode; adult, pediatric, adult/pediatric or neonatal.
3. Select appropriate cuff size. Measure patient’s limb and select appropriately sized cuff according to size marked on cuff or cuff packaging. When cuff sizes overlap for a specified circumference, choose the larger size cuff.
Precaution: Accuracy depends on use of proper size cuff.
4. Inspect cuff for damage. Replace cuff when ageing, tearing or weak closure is apparent. Do not inflate cuff when unwrapped.
Precaution: Do not use cuff if structural integrity is suspect.
5. Inspect patient’s limb prior to application.
Precaution: Do not apply cuff to areas where skin is not intact or tissue is injured. Ensure hook does not contact skin; contact may cause irritation.
6. Palpate artery and place cuff so that patient’s artery is aligned with cuff arrow marked “artery.”
7. Squeeze all air from cuff and confirm that cuff is connected to a non-invasive blood pressure measurement device. Ensure that connection is secure, unoccluded and that tubing is not kinked.
8. wrap cuff snugly around the patient’s limb. Cuff index line must fall within range markings. Ensure that hook and loop closures are properly engaged so that pressure is evenly distributed throughout cuff. If upper arm is used, place cuff as far proximally as possible.
9. Proper cuff wrapping should be snug, but should still allow space for a