CHANNEL Bộ Điều Khiển Từ Xa Không Dây 220v 2 Kênh 433mhz

220V 2 CH Wireless Relay Switch

Input Voltage: AC85V-AC220V

RF Frequency: 433MHZ

RF Working mode: Super heterodyne receiver

Receiver Sensitivity: -107dBm

Remote Control Distance: >100 meter(In open environment)

Decoding Way: MCU Software decoding

Can store the number of remote control:20

Support remote control type: Fixed code, learning code

Channel: 2CH

Multiple working modes: (Jog/Non-Latched ,inter-lock/Latched ,self-lock /Self-Latched)

Wiring Method:Fixed wiring terminal


Working/output way:

Jog/Non-Latched: Press one button is Working /ON. Loosen your finger on the same button is Stop/OFF. One channel switch need one buttons remote control.

Self -lock/Self-Latched: Press one button for one time is working/ON. Press the same button again is stop/OFF. One channel switch need one buttons remote control.

Inter-lock /Latched: Press one button is working/ON, press another button is stop/OFF. One channel switch need 2 buttons remote control.

Reset new operating mode

Jogging:

Press the white learning button on the top of the control panel, LED lights, and then press any button on the remote control set to 'Jog' button, the control panel LED lights flashing, indicating that the setup is complete

Self-locking:

Press the white learning button on the top of the control panel, LED lights, and then press any button on the remote control to set to 'self-locking' button, the control panel LED lights flashing,

Interlock:

Press the white learning button on the control panel, the LED lights, and then press any button on the remote control set to 'start' button, the control panel LED lights flashing, press another button to set to 'stop' button LED Blinking means the setting is complete

Package included:

1 x 220V 2 CH Wireless Relay Switch

Note:

Please allow 1-5mm errors due to manual measurement

Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated