Cầu Chì Chính Hãng Epson T11 T13 L100 Tx121 & Canon Ip1880 Ip1980 Ip2770 Mp258
₫ 23.400
Sản phẩm Cầu Chì Chính Hãng Epson T11 T13 L100 Tx121 & Canon Ip1880 Ip1980 Ip2770 Mp258 đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Fuse specs:
- Support (2MM): Canon IP1000, IP1500, IP2500, IP1300, IP1200, IP1600, IP1700, IP1880, IP1980, IP2770, IP3680, MP145, MP258, MP280. Epson T11, T20, T13, L100, L200, TX101, TX110, TX121, TX200, TX111, ME32, C45, C58, C59, C48, C67, C87, C65, C63, C43
It serves as a mainboard / motherboard safety in the event of a short connection to the mainboard of a printer that dies completely. In this way, the fuses can be broken off so that the print results cannot be printed.
Here are some of the causes of the breakup of fuse on the printer:
- caused by the voltage rising and falling from the pln (ac 220).
- plug the cable to the kendor contact stop or vice versa that 's not fitting.
- it 's flooded with ink that hit the dynamo board system the ink sensor leaked so it hit the head and delivered the error command.
- it 's flooded with ink on chip and cartridges.
- head error.
- flex cable is in ink so it causes the conslet to break.
- always interrupted mechanical work. - often attach the system to overheating and eventually fuse breaks up.
- wrong head, oblique, less fitting on the seat.
- the power cord hasn 't been removed since the head instal
- Support (2MM): Canon IP1000, IP1500, IP2500, IP1300, IP1200, IP1600, IP1700, IP1880, IP1980, IP2770, IP3680, MP145, MP258, MP280. Epson T11, T20, T13, L100, L200, TX101, TX110, TX121, TX200, TX111, ME32, C45, C58, C59, C48, C67, C87, C65, C63, C43
It serves as a mainboard / motherboard safety in the event of a short connection to the mainboard of a printer that dies completely. In this way, the fuses can be broken off so that the print results cannot be printed.
Here are some of the causes of the breakup of fuse on the printer:
- caused by the voltage rising and falling from the pln (ac 220).
- plug the cable to the kendor contact stop or vice versa that 's not fitting.
- it 's flooded with ink that hit the dynamo board system the ink sensor leaked so it hit the head and delivered the error command.
- it 's flooded with ink on chip and cartridges.
- head error.
- flex cable is in ink so it causes the conslet to break.
- always interrupted mechanical work. - often attach the system to overheating and eventually fuse breaks up.
- wrong head, oblique, less fitting on the seat.
- the power cord hasn 't been removed since the head instal