Cáp Nối Dài Cho Laptop Pci-E Riser 1x Sang 16x 6pin
134.000
₫ 96.000
Sản phẩm Cáp Nối Dài Cho Laptop Pci-E Riser 1x Sang 16x 6pin đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 134.000 xuống còn ₫ 96.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Description:
The power supply of the graphics card adopts three FP solid capacitors, which makes the power supply more stable and safe.
Connect the card with the 6PIN interface to strengthen the power supply, so that the graphics card can be supplied from the main board independently, so as to reduce the burden on the main board when taking the multi-graphics card.
The graphics card slot adopts the original loading connector, which makes the graphics card contact better.
PCI-E connector adopts multi-layer shielding wire, which can be connected to 3M without attenuating the signal.
The wire is soft and easy to walk, so you want to put the graphics card in there.
Slot with fixed card, convenient to remove the graphics card and fixed graphics card, make the card not fall off from the slot.
The product applies: brand new design, 1X, 2X, 4X, 8X, 16X compatible (1-16x and 16-16x BOTH can use), the circuit board conversion line, safer, more efficient, more practical!
Specification:
Material: copper, PVC
USB cable: 60cm/23.62in
Package Includes:
1x PCI-E 16X Adapter
1x PCI-E 1X Riser Card
1x USB 3.0 Cable
1x SATA Power Cable
Note:
1. This extension is applicable to the mainboard PCI - E slot (1 x, 2x, 4 x, 8 x, 16 x). Please plug in the power cord for the floppy. When plug PCI-E extension must be computer broken wires plug again.
2. The form a complete set of wire rod is customized, never grab line to plug in.
3. When plug wire must identify the direction, not to counter or offset, prevent burning equipment, plug wire when the socket of equipment first, then plug wire, avoid too hard plug socket pin is broken.
4. graphics Suggestions with the old line, the mainboard is 16 x also recommends using the old row