Cân Điện Tử Mini Bỏ Túi 500 / 3000g 6-unit

Welcome to BEYOU

Decription:
Features:
-This pocket kitchen electronic scale is a portable high precision digital scale.It is with 0.1g accuracy.
-Tare weight function.
-Calibration function. You can calibrate the scale just with a weight.
-Pieces counting function.
-Complete weighing modes. 6 units G ,OZ , OZT , DWT , GN , CT for free shifting.
Description:
Type: 3000g/0.1g; 500g/0.01g
Accuracy: 0.1g 0.01g
Buttons: On/off; Mode; Tare; Pcs
LCD display: 5-digit LCD display
6 units can be selected, G, OZ, OZT, DWT, GN, CT
Scale body size: 180mm* 117mm* 20mm
Weighing platform size: 100mm* 100mm
Weighing pan size: 190mm * 145mm * 25mm
Screen size: 42mm* 20mm
Weight: 0.36kg
Operation method:
-Place the product on a level surface. Short press【ON/OF】or switch on.
-The display shows "0.00" or "0.0", use【M】or【Model】key to realize unit conversion.
-After switching to the unit to be used, weigh the items on the weighing pan.
Cleared:
-Place a tray or container on the weighing pan.
-Press [T] or [TARE] key, the display will show "0.00" or "0.0".
-Then you can add items to the container or tray for weighing.
Counting function:
The prerequisite for the counting function: the weight of each item to be counted must be the same.
-Turn on as described above.
-Long press the [PCS] key, the display shows the sampling value 25, and then you can press the [M/Model] key to switch to other sampling values 60, 75, 100, and then put the same amount of samples according to the displayed value.
-Press [PCS] key to complete sampling, and then press [PCS] key to start counting.
-Put the items to be counted on the weighing pan, and the display will show the specific quantity of the items.
Calibration:
This product has been calibrated before leaving the factory. If the product cannot be weighed normally, please re-calibrate.
Troubleshooting:
The main reasons for inaccurate weighing and malfunction are: low battery power, incorrect calibration, weighing items exceeding the maximum range of the product, or not operating on a flat surface, etc.
[DISPLAY] means to remove the error [OUT2] need to re-calibrate [EEEE] Overweight, the overweight items should be removed immediately.
Example: [3kg/0.1g] represents the maximum weight of 3000 grams, the accuracy is 0.1 grams, the starting weight is 0.5 grams, and the error is within plus or minus 0.3 grams;
【500g/0.01g】represents the maximum load of 500 grams, the accuracy is 0.01 grams, the starting weight is 0.05 grams, and the error is within plus or minus 0.03 grams.
Included:
1 x Electronic