Cân Điện Tử Cảm Biến 20kg+hx711 Ad
66.000
₫ 36.381
Sản phẩm Cân Điện Tử Cảm Biến 20kg+hx711 Ad đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 66.000 xuống còn ₫ 36.381, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Description:
4 leads, easy to use, plus 5-10V drive voltage, direct output as a voltage signal due to force changes.
Links to tutorials and libraries: https://www.instructables.com/id/Scale-With-5kg-Load-Cell-and-HX711-Amplifi/ or https://github.com/aguegu/ardulibs/tree/master/hx711
Works for raspberry pi
The module uses 24 high-precision A / D converter chip hx711, is designed for high-precision electronic scale and design, with two analog input channels, the internal programmable gain amplifier integrated multiplier 128.
The input circuit can be configured to provide a bridge voltage electrical bridge (such as pressure, weight) sensor model is an ideal high-precision, low-cost sampling front-end module
Technical Parameters
Range: 0-20KG
Output sensitivity: 1.0±0.1mV/V
Zero output: ±0.1mV/V
Nonlinear: 0.05% F.S
Lag: 0.05% F.S
Repeatability: 0.05% F.S
Creep: 0.05% F.S/3min
Output impedance: 1000±5% ohms
Zero temperature drift: 0.05% F.S/10°C
Temperature sensitivity drift: 0.05% F.S/10°C
Load cell size: 81*13.5*13.5mm / 3.18*0.53*0.53in
Lead Cable
Motivation is positive: red
Incentive negative: green
Signal is positive: black
signal Negative : white
Note:
Please allow 1-3mm slight deviation due to manual measurement. Thank you!
One end of the sensor is fixed by the screw hole, the other end is kept in a floating state, and the gravity is applied in the direction indicated by the label.
Special attention must be paid not to directly press the white rubber part to avoid damage to the sensor.
Package included:
1 * Load Cell Weight Sensor
1 * HX711 M
4 leads, easy to use, plus 5-10V drive voltage, direct output as a voltage signal due to force changes.
Links to tutorials and libraries: https://www.instructables.com/id/Scale-With-5kg-Load-Cell-and-HX711-Amplifi/ or https://github.com/aguegu/ardulibs/tree/master/hx711
Works for raspberry pi
The module uses 24 high-precision A / D converter chip hx711, is designed for high-precision electronic scale and design, with two analog input channels, the internal programmable gain amplifier integrated multiplier 128.
The input circuit can be configured to provide a bridge voltage electrical bridge (such as pressure, weight) sensor model is an ideal high-precision, low-cost sampling front-end module
Technical Parameters
Range: 0-20KG
Output sensitivity: 1.0±0.1mV/V
Zero output: ±0.1mV/V
Nonlinear: 0.05% F.S
Lag: 0.05% F.S
Repeatability: 0.05% F.S
Creep: 0.05% F.S/3min
Output impedance: 1000±5% ohms
Zero temperature drift: 0.05% F.S/10°C
Temperature sensitivity drift: 0.05% F.S/10°C
Load cell size: 81*13.5*13.5mm / 3.18*0.53*0.53in
Lead Cable
Motivation is positive: red
Incentive negative: green
Signal is positive: black
signal Negative : white
Note:
Please allow 1-3mm slight deviation due to manual measurement. Thank you!
One end of the sensor is fixed by the screw hole, the other end is kept in a floating state, and the gravity is applied in the direction indicated by the label.
Special attention must be paid not to directly press the white rubber part to avoid damage to the sensor.
Package included:
1 * Load Cell Weight Sensor
1 * HX711 M
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000