Camera Lùi Xe Tầm Nhìn Đêm, Chống Thấm Nước, Hỗ Trợ 8 Bóng Đèn Led
372.800
₫ 205.000
Sản phẩm Camera Lùi Xe Tầm Nhìn Đêm, Chống Thấm Nước, Hỗ Trợ 8 Bóng Đèn Led đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 372.800 xuống còn ₫ 205.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Specifications:
100%
Image sensors: Color ccd
Image sensors: Pc7070
Effective pixels: 720x480 pixels
Resolution: 420 television lines
Lens angle: 170°
Television system: Ntsc
White balance: Automatic
Waterproof: Ip67
Power supply: Dc 12v
Minimum irradiation: 0.1 lux
Video output: Rca connector, 1.0 vp-p, 75 ohm
Current consumption: 60ma
Working temperature: - 20° c~90° c, rh95% max.
Storage temperature: - 40° c~80° c, rh 90% is the largest.
Diameter of drilling: (a) convention. 18.5 mm
Length of video line: (a) convention. 6 m (19.7 feet)
Power wire length: (a) convention. 1.5 m (4.9 feet)
Installation:
1) Install the camera in the back of the car using a driller (In the back window of the license plate or other suitable location)
Location)
2) Connect the camera 's power to the reverse light-red line to the positive pole, the black line is connected to the negative pole.
3) Connect the video wire of the camera to the extension line.
4) Connect the extension line to the car monitor.
5) When your car is in reverse, you 'll see the image.
Package includes:
1pc x
1pc x
1pc x
1pc x
Note:
Because of the difference between light and screen, the color of the project may be slightly different from the picture.
Due to manual measurements, please allow deviation of 1-
100%
Image sensors: Color ccd
Image sensors: Pc7070
Effective pixels: 720x480 pixels
Resolution: 420 television lines
Lens angle: 170°
Television system: Ntsc
White balance: Automatic
Waterproof: Ip67
Power supply: Dc 12v
Minimum irradiation: 0.1 lux
Video output: Rca connector, 1.0 vp-p, 75 ohm
Current consumption: 60ma
Working temperature: - 20° c~90° c, rh95% max.
Storage temperature: - 40° c~80° c, rh 90% is the largest.
Diameter of drilling: (a) convention. 18.5 mm
Length of video line: (a) convention. 6 m (19.7 feet)
Power wire length: (a) convention. 1.5 m (4.9 feet)
Installation:
1) Install the camera in the back of the car using a driller (In the back window of the license plate or other suitable location)
Location)
2) Connect the camera 's power to the reverse light-red line to the positive pole, the black line is connected to the negative pole.
3) Connect the video wire of the camera to the extension line.
4) Connect the extension line to the car monitor.
5) When your car is in reverse, you 'll see the image.
Package includes:
1pc x
1pc x
1pc x
1pc x
Note:
Because of the difference between light and screen, the color of the project may be slightly different from the picture.
Due to manual measurements, please allow deviation of 1-