Cảm quang độ sáng chống cảm biến cường độ Ánh Sáng phát hiện 3pin 4pin Cho Arduino
22.000
₫ 11.000
Sản phẩm Cảm quang độ sáng chống cảm biến cường độ Ánh Sáng phát hiện 3pin 4pin Cho Arduino đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 22.000 xuống còn ₫ 11.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Welcome to our shop 👑Kingzizi👑, all the products in this shop are at a favorable price💕, and have quality assurance💕, you can rest assured to buy💕, we will give you the best and highest quality shopping experience! 🌹🌹🌹
USES:
Light intensity detection, the light brightness sensor, smart car light module
The module features:
1.using sensitive type photosensitive resistance sensor
2.the comparator output, signal clean, good waveform, driving ability is strong, for more than 15 ma.
3.with adjustable potentiometer can detect light brightness adjustment
4.the working voltage of 3.3 V to 5 V
5.the output form: digital switch output (0 and 1)
6.has a fixed bolt hole, convenient installation
7.small board PCB size: 3.2 cm x 1.4 cm
8.using the LM393 wide voltage comparator
Module instructions
1.the photosensitive resistance module's most sensitive to ambient light, generally used to detect the environment around the brightness of the light, or MCU trigger relay module, etc.;
2.module in the environment light intensity short of setting threshold, output high level DO end, when the environment light intensity more than set threshold, output DO low level;
3.the DO output can be attached directly to the single chip microcomputer, through single chip microcomputer to detect the high and low level, thus to detect the environment light intensity change;
4.the DO output can be directly driven our relay module, which can form a light-operated switch.
#Photosensitive brightness resistance sensor module Light intensity detect 3pin 4pin For Arduino
#Photosensitive #brightness #resistance #sensor #module #Light intensity detect #Ar
USES:
Light intensity detection, the light brightness sensor, smart car light module
The module features:
1.using sensitive type photosensitive resistance sensor
2.the comparator output, signal clean, good waveform, driving ability is strong, for more than 15 ma.
3.with adjustable potentiometer can detect light brightness adjustment
4.the working voltage of 3.3 V to 5 V
5.the output form: digital switch output (0 and 1)
6.has a fixed bolt hole, convenient installation
7.small board PCB size: 3.2 cm x 1.4 cm
8.using the LM393 wide voltage comparator
Module instructions
1.the photosensitive resistance module's most sensitive to ambient light, generally used to detect the environment around the brightness of the light, or MCU trigger relay module, etc.;
2.module in the environment light intensity short of setting threshold, output high level DO end, when the environment light intensity more than set threshold, output DO low level;
3.the DO output can be attached directly to the single chip microcomputer, through single chip microcomputer to detect the high and low level, thus to detect the environment light intensity change;
4.the DO output can be directly driven our relay module, which can form a light-operated switch.
#Photosensitive brightness resistance sensor module Light intensity detect 3pin 4pin For Arduino
#Photosensitive #brightness #resistance #sensor #module #Light intensity detect #Ar
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000