Cảm Biến Nhiệt Độ Ht-Ntc100K Cho Máy In 3d 1m
22.000
₫ 18.000
Sản phẩm Cảm Biến Nhiệt Độ Ht-Ntc100K Cho Máy In 3d 1m đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 22.000 xuống còn ₫ 18.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
The improvements compared to the other temperature resistance in the market: Upgrade from the original ordinary temperature probe directly exposed temperature measurement to resistance package temperature measurement. Temperature measurement head cylinder diameter 3mm, length 15mm, can be used with the heating block that support the thermocouple.
The temperature measurement range is increased from -50 Celsius ~ +250 Celsius to -50 Celsius ~ +350 Celsius. It helps a lot to print high-temperature filament, can replace the original K-type thermocouple temperature. If need to print high-temperature filament, the HT-NTC100K thermistors are highly recommended.
The new version of HT-NTC100K temperature measuring thermistor adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement.
HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers' convenience, the wires adopts line connection, the customer can tear the wires depends on their application. The high temperature line is double thicker than others in the market, not easy to break off.
Supports the customization of different specifications, including the temperature head cylinder size, length of the wires. Can be used with the new version of the heater (the new heater can heat up to 350 degrees).
Thermistor temperature measurement is stable. The temperature measurement of the upgraded HT-NTC100K can be up to 350 degrees, can effectively replace the K-type thermocouple. It helps much to soe the issues of strict requirements of K-type thermocouple wiring, and the line is long which is susceptible to get external interference and result in temperature fluctuation that can affect the printing quality.
el: HT-NTC100K thermistor temperature sensor components
Negative Temperature Coefficient (NTC)Thermistor el: B3950
Temperature measurement head size: 3 * 15mm
Material: ABS
colour: white
Length: 1 M/2 M
Package Contents: 1* Thermistor Temperature Sensor
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
The temperature measurement range is increased from -50 Celsius ~ +250 Celsius to -50 Celsius ~ +350 Celsius. It helps a lot to print high-temperature filament, can replace the original K-type thermocouple temperature. If need to print high-temperature filament, the HT-NTC100K thermistors are highly recommended.
The new version of HT-NTC100K temperature measuring thermistor adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement.
HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers' convenience, the wires adopts line connection, the customer can tear the wires depends on their application. The high temperature line is double thicker than others in the market, not easy to break off.
Supports the customization of different specifications, including the temperature head cylinder size, length of the wires. Can be used with the new version of the heater (the new heater can heat up to 350 degrees).
Thermistor temperature measurement is stable. The temperature measurement of the upgraded HT-NTC100K can be up to 350 degrees, can effectively replace the K-type thermocouple. It helps much to soe the issues of strict requirements of K-type thermocouple wiring, and the line is long which is susceptible to get external interference and result in temperature fluctuation that can affect the printing quality.
el: HT-NTC100K thermistor temperature sensor components
Negative Temperature Coefficient (NTC)Thermistor el: B3950
Temperature measurement head size: 3 * 15mm
Material: ABS
colour: white
Length: 1 M/2 M
Package Contents: 1* Thermistor Temperature Sensor
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000