Bút Vẽ 3d Thông Minh Hình Robot Dành Cho Trẻ Em
780.000
₫ 507.000
Sản phẩm Bút Vẽ 3d Thông Minh Hình Robot Dành Cho Trẻ Em đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 780.000 xuống còn ₫ 507.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
⛅Welcome to our store, we will provide you with the most satisfactory service! We provide you with high quality headphones, data cables, chargers, mobile phone accessories, Bluetooth speakers, smart bracelets and various electronic modules
Decription:
Features:
1. With built-in voices broadcast function, long press two button at the same time to switch between Chinese and English languages.
2. The motor adopts double turbines material, which can be directly inserted without trimming consumables.
3. The eye of the robot are indicator lights, which are more beautiful and elegant.
4. The appearance of the robot is small and exquisite. Both adults and children are comfortable to hold.
5. USB interface 5V 2A.
6. Smart 2 button control. Simple and easy to operate.
7. One-button 15 seconds continuous automatic material returns.
8. Gently rotate the nib to replace it.
Notice:
1. Actual color may be slightly different from the image due to different monitor and light effect. Please allow minor deviation due to manual measurement.
Specification:
Type: USB 3D Scribble Pen
Material: plastic
Use: Graffiti, DIY design
Size: 14.8 * 4.8cm
Discharge method: hot melt extrusion stacking
Forming method: 3D molding
Printing range: unlimit
Spin speed: adjustable
Printing supplies: PLA material at normal temperature 1.75MM
Heating temperature: within the range of 75-95 degrees
Working voltage: 5V 2A
Nozzle diameter: 0.6mm
Material: plastic shell
LED indicator
Instructions for use:
1. For the first time, press and hold the feed button to start the robot (voices prompt to open the voices: power on), eye bright red, when the temperature reaches the usable temperature, the eye will turn blue and bright (voices prompt: heating completed, be careful of burns).
2. Click the feed button to enable the automatic feed function, double-click to switch the speeds (voices prompt: fast or low speeds), and click pause (voices prompt: pause).
3. Click the unload button for 15 seconds to unload (voices prompt: unload).
4. After the material returns is completed, press and hold the material returns button to shut down (the voices will beeps)
5. When the standby time exceeds about 80 seconds, the robot's eye blinks green and automatically shut down (voices beeps prompts).
6. Red light flashes 5 times in the standby state (voices beeps prompt) automatically turns off
7. Long press both keys simultaneously to switch languages!
Included:
1 x 3D Scribble Pen
1 x charger
1 x USB cable
1 x base
1 x PLA supplies random monochrome 8 meters
1 x instruction m
Decription:
Features:
1. With built-in voices broadcast function, long press two button at the same time to switch between Chinese and English languages.
2. The motor adopts double turbines material, which can be directly inserted without trimming consumables.
3. The eye of the robot are indicator lights, which are more beautiful and elegant.
4. The appearance of the robot is small and exquisite. Both adults and children are comfortable to hold.
5. USB interface 5V 2A.
6. Smart 2 button control. Simple and easy to operate.
7. One-button 15 seconds continuous automatic material returns.
8. Gently rotate the nib to replace it.
Notice:
1. Actual color may be slightly different from the image due to different monitor and light effect. Please allow minor deviation due to manual measurement.
Specification:
Type: USB 3D Scribble Pen
Material: plastic
Use: Graffiti, DIY design
Size: 14.8 * 4.8cm
Discharge method: hot melt extrusion stacking
Forming method: 3D molding
Printing range: unlimit
Spin speed: adjustable
Printing supplies: PLA material at normal temperature 1.75MM
Heating temperature: within the range of 75-95 degrees
Working voltage: 5V 2A
Nozzle diameter: 0.6mm
Material: plastic shell
LED indicator
Instructions for use:
1. For the first time, press and hold the feed button to start the robot (voices prompt to open the voices: power on), eye bright red, when the temperature reaches the usable temperature, the eye will turn blue and bright (voices prompt: heating completed, be careful of burns).
2. Click the feed button to enable the automatic feed function, double-click to switch the speeds (voices prompt: fast or low speeds), and click pause (voices prompt: pause).
3. Click the unload button for 15 seconds to unload (voices prompt: unload).
4. After the material returns is completed, press and hold the material returns button to shut down (the voices will beeps)
5. When the standby time exceeds about 80 seconds, the robot's eye blinks green and automatically shut down (voices beeps prompts).
6. Red light flashes 5 times in the standby state (voices beeps prompt) automatically turns off
7. Long press both keys simultaneously to switch languages!
Included:
1 x 3D Scribble Pen
1 x charger
1 x USB cable
1 x base
1 x PLA supplies random monochrome 8 meters
1 x instruction m
Sản Phẩm Liên Quan
HOT