Bugi NGK Laser Iridium SILMAR9B9 - KAWASAKI Z1000 2015-2018 / SH VIETNAM 2020
₫ 480.000
Sản phẩm Bugi NGK Laser Iridium SILMAR9B9 - KAWASAKI Z1000 2015-2018 / SH VIETNAM 2020 đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Bugi NGK Laser Iridium chuyên dùng cho các dòng xe phân khối lớn.
Sản xuất tại Nhật Bản
NGK Laser Iridium spark plugs provide superior ignitability and long service life.
Fine wire iridium tipped center electrode and fine wire platinum tipped ground electrode ensures slow wear rate providing stable idle, superior anti fouling, improved fuel efficiency and lower emissions.
Trivalent metal plating provides superior anti-corrosion and anti-seizing properties
Corrugated ribs prevent flashover
Pure alumina silicate ceramic insulator, provides superior strength and better heat transfer
Copper core aids in heat removal
Triple seals prevent leakage
Shell
Thread Size: 10mm
Thread Pitch: 1.0mm
Seat Type: Gasket
Resistor Value: 5K Ohm
Reach: 26.5mm (1.04")
Hex Size: 9/16" (14mm)
Terminal Type: Threaded Stud
Overall Height: ISO
Gap: .035" (0.9mm)
Center Electrode
Material: Iridium
Type: Fine Wire
Size: 0.6mm
Projection: Non-Projected
Ground Electrode
Material: Platinum
Type: Standard
Shape: Taper Cut
Quantity: 1
Specifications
Torque Specs: Cast Iron: 7.2-10.8 lb. ft. Aluminum: 7.2-8.7 lb. ft.
Brand: NGK
Heat Range: 9
Longevity: 100k Miles
Resistor
Sản xuất tại Nhật Bản
NGK Laser Iridium spark plugs provide superior ignitability and long service life.
Fine wire iridium tipped center electrode and fine wire platinum tipped ground electrode ensures slow wear rate providing stable idle, superior anti fouling, improved fuel efficiency and lower emissions.
Trivalent metal plating provides superior anti-corrosion and anti-seizing properties
Corrugated ribs prevent flashover
Pure alumina silicate ceramic insulator, provides superior strength and better heat transfer
Copper core aids in heat removal
Triple seals prevent leakage
Shell
Thread Size: 10mm
Thread Pitch: 1.0mm
Seat Type: Gasket
Resistor Value: 5K Ohm
Reach: 26.5mm (1.04")
Hex Size: 9/16" (14mm)
Terminal Type: Threaded Stud
Overall Height: ISO
Gap: .035" (0.9mm)
Center Electrode
Material: Iridium
Type: Fine Wire
Size: 0.6mm
Projection: Non-Projected
Ground Electrode
Material: Platinum
Type: Standard
Shape: Taper Cut
Quantity: 1
Specifications
Torque Specs: Cast Iron: 7.2-10.8 lb. ft. Aluminum: 7.2-8.7 lb. ft.
Brand: NGK
Heat Range: 9
Longevity: 100k Miles
Resistor