Bóng Đèn Led 3 Chip 30w 3570 3000k 9v 3a Siêu Sáng Cho Xe Hơi

Wholesale (chat)
─────────


Delivery guarantee products are the best quality.


Product parameters:
────────
Product name: 3570 lamp beads
Model no. ht-3570-a-30-ww
Power: 30w
Voltage: 9-10v
Current: 3000ma
Optical flux: 2000lm
Color temperature/wavelength:
Warm white light 2800-3500k
Bead size: 3.5x7.0 mm
C6 copper substrates available
Note: the single copper base plate for light beads is not sufficient for heat dissipation.
The radiator is needed to heat off, otherwise the beads of light will burn out.


Product characteristics:
────────
Aluminum nitride ceramic substrate packaging
High brightness, high light efficiency, high current drive
Color domain by ansi standard
Small size: 3.5mm x 7mm, typical luminous angle 120°
Esd protection
Typical color temperature: 3000k
Typical optical flux: 1200lm 1500ma


Application area:
────────
Outdoor lighting applications
Special lighting applications
Car headlight applications


Product materials:
────────
Floor plate: ceramic substrate
External sealant: silicone
Solid crystal: tin eutectic
Chip: inverted chip

Points to note:
────────
1) the photoelectricity level of the product is determined by howte photoelectricity. the photoelectricity performance of the product varies from one level to another. customers are invited to decide the method of use according to their own conditions of use.
2) the error at all levels of optical flux is 10 per cent.
3) the error between the main wave length levels is 1 nm, x, y-chromatic coordinates are 0.015.
4) the error between all levels of the vertical voltage is 0.05v.
5) the product shall be used as soon as possible after it has been unpacked, and the product shall not be stored and used in an environment of corroded gasses. the unused lamp shall be sealed and stored, otherwise it will lead to an oxidation of the lead foot.
6) if the chip material is ingan, pay attention to electrostatic protection when using. personnel should wear electrostatic rings and anti-static gloves, equipment and instruments grounded.
7) other points to note refer to high power led applications.
9) the company shall not be liable for any consequences of the output beyond the permitted use conditions of this product.


Description of use:
────────
Storage: it is recommended to store the product in a drying cabinet with a dry agent to avoid dampness. storage temperature is: 5°C~30°C. humidity:
60% hr.
Second, the products avoid mechanical pressure and excessive vibration in the cooling process after solder.Thirdly, welding on deformed pcb plates is prohibited.
Products shall not be exposed to water, oil or organic solutions.
V. opening moisture-proof packaging within 7 days of the product use.Vi. antistatic requirements:
When using products, anti-static rings or anti-static gloves must be worn. all equipment, installlations and platforms must be grounded effectively.Vii. better use of products and resistors



We 're 2fl luxury light glory brand
Please don't sell cou