Bộ Tiếp Nhận Tín Hiệu Điều Khiển Từ Xa Ac220v 1ch 1ch + 2 Rf Không Dây 315mhz
433.600
₫ 259.300
Sản phẩm Bộ Tiếp Nhận Tín Hiệu Điều Khiển Từ Xa Ac220v 1ch 1ch + 2 Rf Không Dây 315mhz đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 433.600 xuống còn ₫ 259.300, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Specification:
Brand new
Receiver (switch)
Dimensions(approx.): 6.50 * 3.50 * 2.00cm (L * W * H)
Operating voltage: 220 VAC
Working frequency: 315 MHz
Maximum load: 1500 W
Operation: jogging, self-locking and inter-lock (adjustable by pad)
Simple operation, support more flexible and any combination
Operation --- jogging, inter-lock and self-locking, it can be switched by the 1, 2, 3 spot.
Output method according to A, B, C, three pads of the output are loaded and the output signal switching is switched over
In lamps and lanterns, electric door, windows, hoists, gateway, hoist, industrial controls and security industry and other areas Mainly used
Learning Method:
Hold down the learn button until the display clears, then press any button on the remote control, display 4 times flashing, then keep lighting, at this time, it means that it learns successfully.
Using Method:
Continuously hold the button for about 8 seconds to learn until the display cleared, then hold lighting, it means it clears successfully
Working / output:
Jog: Pressing a button works / ON. Use the same button to release the button. A channel switch (receiver) requires a key remote control (transmitter)
Auto-lock: Press a button for a time works / ON. Press the same button again to stop / stop. (A channel switch (receiver) requires a key remote control (transmitter)
Inter-Lock: Pressing a button works / ON, press another button is Stop / Off. (One channel switch (receiver) must have two buttons remote control (transmitter)
Package Included:
1* Receiver
2* Wireless Remote Controls
Note:
The controller can learn fixed code (PT2262, SC2260 chip, etc.) / learning code (EV1527, HS2240, etc.) 20 different codes
Press any button on the remote control, in addition, it will delete the first study remote control code.
Please allow minor error due to manual measurement.
Due to the difference between different monitors, the picture may not reflect the actual color of the it
Brand new
Receiver (switch)
Dimensions(approx.): 6.50 * 3.50 * 2.00cm (L * W * H)
Operating voltage: 220 VAC
Working frequency: 315 MHz
Maximum load: 1500 W
Operation: jogging, self-locking and inter-lock (adjustable by pad)
Simple operation, support more flexible and any combination
Operation --- jogging, inter-lock and self-locking, it can be switched by the 1, 2, 3 spot.
Output method according to A, B, C, three pads of the output are loaded and the output signal switching is switched over
In lamps and lanterns, electric door, windows, hoists, gateway, hoist, industrial controls and security industry and other areas Mainly used
Learning Method:
Hold down the learn button until the display clears, then press any button on the remote control, display 4 times flashing, then keep lighting, at this time, it means that it learns successfully.
Using Method:
Continuously hold the button for about 8 seconds to learn until the display cleared, then hold lighting, it means it clears successfully
Working / output:
Jog: Pressing a button works / ON. Use the same button to release the button. A channel switch (receiver) requires a key remote control (transmitter)
Auto-lock: Press a button for a time works / ON. Press the same button again to stop / stop. (A channel switch (receiver) requires a key remote control (transmitter)
Inter-Lock: Pressing a button works / ON, press another button is Stop / Off. (One channel switch (receiver) must have two buttons remote control (transmitter)
Package Included:
1* Receiver
2* Wireless Remote Controls
Note:
The controller can learn fixed code (PT2262, SC2260 chip, etc.) / learning code (EV1527, HS2240, etc.) 20 different codes
Press any button on the remote control, in addition, it will delete the first study remote control code.
Please allow minor error due to manual measurement.
Due to the difference between different monitors, the picture may not reflect the actual color of the it