Bộ Sạc Pin Trên Xe Hơi Esp32 18650 Có Cổng Usb 2.0
142.889
₫ 102.881
Sản phẩm Bộ Sạc Pin Trên Xe Hơi Esp32 18650 Có Cổng Usb 2.0 đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 142.889 xuống còn ₫ 102.881, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
18650 battery base battery protection overcharge and over discharge with USB2.0 socket
description
The 18650 battery has a strong 18650 battery charge and discharge capability. This is very helpful for many projects.
This is a better solution than the 18650 shielded V1 that can be charged and discharged on 3A. It also has 4 LEDs to show charging status and dump energy. When the output current is less than 30mA, it can be detected that the target board is automatically turned off. The sleep current is only 6 uA.
When you click the button, the charging work will start and the LED will show the dumped energy. When you continue to click for more than 2.5 seconds, the output will stop.
parameter:
Overcharge protection
Over discharge protection
4 LED indicators
Temperature protection
Battery short circuit protection
Click the button to start working
The Clikc button 2.5s will stop the output and enter the sleep mode.
If <10mA output <30mA will enter sleep mode.
The current in sleep mode is 6uA.
The efficiency is 93.5%
Input: 5-9V
Working temperature: -40 ℃ - 85 ℃
Pay attention to "+" and "-", you should follow the direction of "+" and "-" on the PCB.
Note:
Due to manual measurement, please allow 1-3mm different.
Due to different displays and different lighting, the image may not reflect the actual colors of the project.
Thank you for your understanding.
When purchasing electronic components, please have certain electronic basic knowledge of the module. Most modules only provide descriptions or send materials. There is no technical consulting support. Please be careful to shoot for begin
description
The 18650 battery has a strong 18650 battery charge and discharge capability. This is very helpful for many projects.
This is a better solution than the 18650 shielded V1 that can be charged and discharged on 3A. It also has 4 LEDs to show charging status and dump energy. When the output current is less than 30mA, it can be detected that the target board is automatically turned off. The sleep current is only 6 uA.
When you click the button, the charging work will start and the LED will show the dumped energy. When you continue to click for more than 2.5 seconds, the output will stop.
parameter:
Overcharge protection
Over discharge protection
4 LED indicators
Temperature protection
Battery short circuit protection
Click the button to start working
The Clikc button 2.5s will stop the output and enter the sleep mode.
If <10mA output <30mA will enter sleep mode.
The current in sleep mode is 6uA.
The efficiency is 93.5%
Input: 5-9V
Working temperature: -40 ℃ - 85 ℃
Pay attention to "+" and "-", you should follow the direction of "+" and "-" on the PCB.
Note:
Due to manual measurement, please allow 1-3mm different.
Due to different displays and different lighting, the image may not reflect the actual colors of the project.
Thank you for your understanding.
When purchasing electronic components, please have certain electronic basic knowledge of the module. Most modules only provide descriptions or send materials. There is no technical consulting support. Please be careful to shoot for begin
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000