Bộ Sạc Pin Lipo 4s 40a Cho Động Cơ 14.8v 16.8v
100.000
₫ 50.000
Sản phẩm Bộ Sạc Pin Lipo 4s 40a Cho Động Cơ 14.8v 16.8v đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 100.000 xuống còn ₫ 50.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Scope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery)
Charging voltage: 16.8V - 18.1V
Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)
Continuous charge current (upper limit): 20A
Enhanced version: for starting current below 80A, power 135W below the drill.(Not balanced function)
Note:this item is Enhanced version
Note 1: The successful start of the drill requires three 15C-20C power battery, or six 10C-15C power battery (ordinary 18650 can not start the drill!!).
Note 2: strictly according to map wiring 0V, 4.2V, 8.4V, 12.6V, 16.8V, do not deliberately short circuit.
Note 3: When the load of the brush motor is used, try to connect a non-polar (withstand voltage above 25V, capacity 10uF-100uF) to the motor's positive and negative terminals to prevent the reverse spike from the motor. Break the MOS tube.
Note 4: 4 groups of batteries in series, please ensure that the voltage of each group of batteries, if not the same, please fill each battery separately and then use in series. The The Discharge test, the voltage drop faster battery that group is poor battery.
Condition:New
Type:Electronic products
Application:Computer
Operating Temperature:-40-+85
Electronic products:For Arduino STM
colour:green
Material:PC+ metal
size:5.5*4.4cm
Package Contents:
1 * 4S 40A Li-ion Lithium Battery Protection BoardOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
Charging voltage: 16.8V - 18.1V
Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)
Continuous charge current (upper limit): 20A
Enhanced version: for starting current below 80A, power 135W below the drill.(Not balanced function)
Note:this item is Enhanced version
Note 1: The successful start of the drill requires three 15C-20C power battery, or six 10C-15C power battery (ordinary 18650 can not start the drill!!).
Note 2: strictly according to map wiring 0V, 4.2V, 8.4V, 12.6V, 16.8V, do not deliberately short circuit.
Note 3: When the load of the brush motor is used, try to connect a non-polar (withstand voltage above 25V, capacity 10uF-100uF) to the motor's positive and negative terminals to prevent the reverse spike from the motor. Break the MOS tube.
Note 4: 4 groups of batteries in series, please ensure that the voltage of each group of batteries, if not the same, please fill each battery separately and then use in series. The The Discharge test, the voltage drop faster battery that group is poor battery.
Condition:New
Type:Electronic products
Application:Computer
Operating Temperature:-40-+85
Electronic products:For Arduino STM
colour:green
Material:PC+ metal
size:5.5*4.4cm
Package Contents:
1 * 4S 40A Li-ion Lithium Battery Protection BoardOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1