Bộ Sạc Liitokala Lii-402 4 Ngăn Cho Aa / Aaa 18650 18350 Ni-Mh Li-Ion Pwz

Welcome to the shop, the quality is excellent and the price is affordable！ #kacomeis.vn
Description


Notes:
The charging cylinder can charge lithium ion batteries (3.7V and 3.8V), Ni-MH/ Cd, Lithium ferric phosphate (LiFePO4)
Read this manual before using and pay special attention to the recommended charging current, you should avoid charging the beyond the recommended current limit
5V USB adapter (2A power adapter) is recommended
Cationic heating during charging
Remove the power supply charger after full charging, and remove the from the charger at the same time
For indoor use
The display of reference data and refer to professional instrument for more accurate data
Can not charge the type of 1.6-2.2V
Features:
Micro USB DC 5V input, four independent charging and micro computer management system
Four charging current mode (500mAh/ 700mAhn/ 1000mAh/ 2000 mAh), 2000 mAh current mode is fixed only in the fourth slot
The LED indicators show the charging progress: 25% -50% -75% -100% and the type of (size): Ni-MH 1.2V, Li-Fe 3.2V, Li-ion 3.7V, Li -ion 3.85V
Identify Li-ion and Ni-MH batteries automatically and manually adjust the charging mode of LiFePO4 and 3.85V li-ion batteries
Update for OV. It does not charge any from 1.65 to 1.85V (update of the current can only be detected)
Protection for overcharge and over-discharge and short circuit, identify broken and reverse polar inspection
Low voltage and constant current charing
Input interface by DC and operating voltage is 5V-2A (Micro plug)
Built with 5V / 1000mAh USB discharge (output) function
Button, LED and function:
-Buttons: While the electricity is connected, 1) press the button to change the type, start charging 5 seconds after adjusting the type of (3.2 V or 3.85 V), 1.2 V Ni-MH and li -ion 3.7 V AC is detected automatically, so you need a set of only 3.2 V and 3.8 V batteries; 2) change the current load current amount 4 at any time during charging by long press on the button
-LED: While connecting to 5V input, all LEDs light up immediately 1) If no is put on, 500mAh LED goes on and others will turn off. 2) When the is detected in, 4 LED lights and 3.7V LED keep flashing to indicate to set the type, if no operation, it will start charging 5 seconds after automatically under detection, four LED lights will show the state of charge. 3) Press the button. can show the type for 5 seconds. 4) No electricity is connected, insert a can quickly shows the volume of the remaining .
-USB output indicator: To the detected USB download port, volume indicator will light up for 10 seconds and exit, press the button to turn on again.
-LED show reference