Bộ sạc ác quy thông minh 12V 5A 100V-240V với màn hình hiển thị

Description:
Smart chip, fast charge
Automatically stop charge when fully charged
Heat dissipate function, safer for charging
Positive and negative pole clamp connector
Easy to carry, simple to use, just connect and plug in
Charging process displayed by the indicator makes the user grasp the battery charging state
Three-phase charging mode for the efficient (constant current, constant voltage, floating ) PWM charging mode
With battery-line detection, short circuit, over-current, over-voltage and reverse polarity protection and other functions.
Specifications:
Applicable battery : 12V Lead Acid Battery/Gel battery
Max charging current: 5A
Rated input voltage: 100-240V
Rated efficiency: 47-63Hz
Rated frequency: ≥ 0.85
Full load efficiency: ≥ 87%
Temperature range: -30- + 90 ℃
Plug: EU Plug
Plug cable length: 55in/ 140cm
Clamp connector cable length: 14in/ 350mm
Steps:
Check whether the battery's rated voltage matches the charger's rated voltage;
Connect the charger and the batteries together as required correctly .
Check whether power supply's voltage matches charger's rated input voltage
Connect the battery and charger to the power supply, then observe if the charging indicator lights or not.
If the charging indicator doesn't light, please cut off the power supply and check the power supply, battery and all connections.
After fully charged, please first disconnect the power supply ,and then disconnect the battery cable
Instructions:
Connect the power supply plug to the 110V/220V socket, if power indicator is on, the product will enter standby state.
The two ends of charging output power cable are connected to the battery positive and negative poles, if battery indicator lights which means the battery is charging (pay attention to distinguish between positive and negative poles, otherwise the battery can not be charged normally)
If battery indicator lights, it means the battery is fully charged and the charging ends.
Specifications:
Smart chip, fast charge
Automatically stop charge when fully charged
Hanging design, easy to install
Heat dissipate function, safer for charging
Positive and negative pole clamp connector
Easy to carry, simple to use, just connect and plug in
Package Included:
1 x 12V 5A Battery Charger(EU Plug)
Notes:
The charger is designed for 12V lead-acid batteries and gel batteries, not as a power supply for other electronic devices.
Charger inside is with high voltage and dangerous, if it fails, please contact us, users or non-professionals are strictly prohibited to open the charger!
Due to the inevitable thermal loss generated when charging, so the charger and the battery should be used in a well-ventilated indoor environment , don't use them in a humid, high-heat or flammable gas environment.
This charger has reverse polarity protection function, its output end has no output voltage if not connected with the battery, only when they connect together, then it has output vol