Bộ mô đun ESP-12E và bảng mạch mở rộng ESP8266
78.600
₫ 46.374
Sản phẩm Bộ mô đun ESP-12E và bảng mạch mở rộng ESP8266 đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 78.600 xuống còn ₫ 46.374, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
No need to download resetting!
Use of short modules that can simultaneously control board and motor.
In the experiment, by short-circuiting block the merger, the VIN and VM short, while power supply to the motor and the control board.
Lead ESP12 DEV KIT All-function pins: SPI, UART, GPIO, AI and 3.3V power connector.
When l insert ESP-12E module, please note the direction consistent with an expansion board antenna.
Precautions.
100% Brand New and High Quality
Motor power, control power separation.
ESP12 DEV KIT development board expansion module.
CP2102 ESP8266 Development Board &L293D ESP-12E Wifi Motor Drive for NodeMcu
A great set of tools to develop ESP8266!
Based on ESP-12E development kit, it can facilitate the development of WiFi Smart car, free to send Android phone source.
Control power range: 4.5V ~ 9V.
ESP8266 has IO Pin
Motor power range: 4.5V ~ 36V.
NodeMCU ESP8266 ESP-12E V1.0 Wifi CP2102 IoT Lua 267
- 802.11 b/g/n
- Integrated low power 32-bit MCU
- Integrated 10-bit ADC
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, and power management units
- Supports antenna diversity
- WiFi 2.4 GHz, support WPA/WPA2
- Support STA/AP/STA+AP operation modes
- Support Smart Link Function for both Android and iOS devices
- SDIO 2.0, (H) SPI, UART, I2C, I2S, IR Remote Control, PWM, GPIO
- STBC, 1x1 MIMO, 2x1 MIMO
- A-MPDU & A-MSDU aggregation & 0.4s guard interval
- Deep sleep power <10uA, Power down leakage current < 5uA
- Wake up and transmit packets in < 2ms
- Standby power consumption of < 1.0mW (DTIM3)
- +20 dBm output power in 802.11b mode
- Operating temperature range -40C ~ 125C
- FCC, CE, TELEC, WiFi Alliance, and SRRC certified
ESP8266 WIFI Motor Drive Expansion Board L293D for ESP12E
Motor power supply (VM): 4.5V ~ 36V, can be powered separately
Control power (VIN): 4.5V ~ 9V (10VMAX), can be powered separately
Module provides short-circuit sub (short the VM and VIN), you can easily use one power (must 4.5V ~ 9V) while completing motor drive and control
Logic Operating current Iss: ≤60mA (Vi = L), ≤22mA (Vi = H)
Drive part of the work current Io: ≤1.2A
Maximum power dissipation: 4W (T = 90 ℃)
Control signal input level: High: 2.3V≤VIH≤VIN; Low: -0.3V≤VIL≤1.5V
Working temperature: -25 ℃ ~ + 125 ℃℃
Drive Type: Dual high-power H-bridge driver
ESP12E Dev Kit Control Port: D1, D3 (A motor); D2, D4 (B motor)
Expand two-way motor-driven, two-way direct drive motor
Onboard power switch
Motor power, control power separation; In the experiment, by short-circuiting block the merger,
the VIN and VM short, while power to the motor and the control board
Package included:
1*ESP-12E
1*ESP8266 WIFI Motor Drive Expansion Board
Use of short modules that can simultaneously control board and motor.
In the experiment, by short-circuiting block the merger, the VIN and VM short, while power supply to the motor and the control board.
Lead ESP12 DEV KIT All-function pins: SPI, UART, GPIO, AI and 3.3V power connector.
When l insert ESP-12E module, please note the direction consistent with an expansion board antenna.
Precautions.
100% Brand New and High Quality
Motor power, control power separation.
ESP12 DEV KIT development board expansion module.
CP2102 ESP8266 Development Board &L293D ESP-12E Wifi Motor Drive for NodeMcu
A great set of tools to develop ESP8266!
Based on ESP-12E development kit, it can facilitate the development of WiFi Smart car, free to send Android phone source.
Control power range: 4.5V ~ 9V.
ESP8266 has IO Pin
Motor power range: 4.5V ~ 36V.
NodeMCU ESP8266 ESP-12E V1.0 Wifi CP2102 IoT Lua 267
- 802.11 b/g/n
- Integrated low power 32-bit MCU
- Integrated 10-bit ADC
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, and power management units
- Supports antenna diversity
- WiFi 2.4 GHz, support WPA/WPA2
- Support STA/AP/STA+AP operation modes
- Support Smart Link Function for both Android and iOS devices
- SDIO 2.0, (H) SPI, UART, I2C, I2S, IR Remote Control, PWM, GPIO
- STBC, 1x1 MIMO, 2x1 MIMO
- A-MPDU & A-MSDU aggregation & 0.4s guard interval
- Deep sleep power <10uA, Power down leakage current < 5uA
- Wake up and transmit packets in < 2ms
- Standby power consumption of < 1.0mW (DTIM3)
- +20 dBm output power in 802.11b mode
- Operating temperature range -40C ~ 125C
- FCC, CE, TELEC, WiFi Alliance, and SRRC certified
ESP8266 WIFI Motor Drive Expansion Board L293D for ESP12E
Motor power supply (VM): 4.5V ~ 36V, can be powered separately
Control power (VIN): 4.5V ~ 9V (10VMAX), can be powered separately
Module provides short-circuit sub (short the VM and VIN), you can easily use one power (must 4.5V ~ 9V) while completing motor drive and control
Logic Operating current Iss: ≤60mA (Vi = L), ≤22mA (Vi = H)
Drive part of the work current Io: ≤1.2A
Maximum power dissipation: 4W (T = 90 ℃)
Control signal input level: High: 2.3V≤VIH≤VIN; Low: -0.3V≤VIL≤1.5V
Working temperature: -25 ℃ ~ + 125 ℃℃
Drive Type: Dual high-power H-bridge driver
ESP12E Dev Kit Control Port: D1, D3 (A motor); D2, D4 (B motor)
Expand two-way motor-driven, two-way direct drive motor
Onboard power switch
Motor power, control power separation; In the experiment, by short-circuiting block the merger,
the VIN and VM short, while power to the motor and the control board
Package included:
1*ESP-12E
1*ESP8266 WIFI Motor Drive Expansion Board
Sản Phẩm Liên Quan
HOT
HOT