Bộ Máy Hàn Điện Tử Mini Cầm Tay 2.4 "tft

Diy cortex-m3 2.4 tft, circuit operation is simple and reliable, displayable frequency, cycle, pulse width, space ratio, max./min. / avg. / peak-peak/virgin values.

Characteristics:
Use arm cortex-m3 processor (Stm32f103c8) And contains a 2.4-inch color tft screen.
For example,, second development based on this package, can be changed to millivometer, data recorder.
With description, easy to install and operate.
Automatic/normal/single trigger mode, instant waveforms can be easily captured.
The available uplift along or down the trigger.
A previous waveform that can be observed before triggering (Negative delay)。
Waveform displays can be frozen at any time (Hold function)。
Digital display with waveform parameters, including frequency, cycle, pulse width, space ratio, max. / min. / avg. / peak-peak/virgin values.
Waveform storage function: The waveform will not be lost after shutdown.
Short-circuit and open-circuit detection: Help users find welding errors.
Tft controller recognition function.
Smd welding, more suitable for electronic beginners.
Note:
When you receive this diy suite, please don 't weld dc 9v power before testing the circuit board, if it displays scanning lines, then the plate is normal If abnormality is shown, please contact us.

Product specifications:
Maximum real-time sampling rate: 1msa/s
Analog bandwidth: 0-200khz
Sensitivity range: 5mv/div-20v/div
Maximum input voltage: 50vpk (1x probe)
Input impedance: 1m ohm/20pf
Accuracy: 12 seats
Length of records: Point 1024
Coupling mode: Dc/ac/gnd
Time frame: 500s/div-10us/div
Trigger mode: Automatic, normal and single
Trigger location: Center of the buffer zone
Power voltage: Dc 9v (8-10v)
Current consumption: At 9v 120ma
Main board size: 94x65mm/3.7x2.56 in
Size of analog plate: 65x47mm/2.56x1.85 in
Screen size: 52x40mm/2x1.57 in
Packaging size: 14.5x10 x 3.7cm/5.7x3.94x1.45 in
Packing weight: 179g/6.33oz

Packing list:
1 x diy
1 x probe
1 x diy case
3 x user manual (Engli