Bo mạch Teensy 3.5 Arduino
₫ 1.200.000
Sản phẩm Bo mạch Teensy 3.5 Arduino đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. Each Teensy 3.5 comes pre-flashed with a bootloader so you can program it using the on-board USB connection: no external programmer needed! You can program for the Teensy in your favorite program editor using C *or *you can install the Teensyduino add-on for the Arduino IDE and write Arduino sketches for it!
The processor on the Teensy also has access to the USB and can emulate any kind of USB device you need it to be, making it great for USB-MIDI and other HID projects. The 32-bit, 120MHz processor brings a few other features to the table as well, such as multiple channels of Direct Memory Access, several high-resolution ADCs and even an I2S digital audio interface! There are also four separate interval timers, plus a delay timer! Oh yeah, and all digital pins have interrupt capability and are 5V tolerant.
All of this functionality is jammed into a 62.3mm x 18.0mm board with all solder points on a 0.1" grid so you can slap it on a breadboard and get to work! The Teensy 3.5 (as well as its sibling, the Teensy 3.6) is larger, faster and capable of more projects, especially with its onboard micro SD card port. An upgraded ARM Cortex MCU (120MHz from 72MHz), more memory (512K from 256K), as well as more RAM, EEPROM and accessible pins make up the key new features of this "teensy" board. The Teensy 3.5 is slightly scaled down from the Teensy 3.6 but is offered at a cheaper price point, comparatively.
120MHz ARM Cortex-M4 with Floating Point Unit
512K Flash, 256K RAM, 4K EEPROM
Microcontroller Chip MK64FX512VMD12
1 CAN Bus Port
16 General Purpose DMA Channels
5V Tolerance on All Digital I/O Pins
62 I/O Pins (42 breadboard friendly)
25 Analog Inputs to 2 ADCs with 13-bit resolution
2 Analog Outputs (DACs) with 12-bit resolution
20 PWM Outputs (Teensy 3.6 has 22 PWM)
USB Full Speed (12Mbit/sec) Port
Ethernet mac, capable of full 100Mbit/sec speed
Native (4-bit SDIO) micro SD card port
I2S Audio Port, 4-Channel Digital Audio Input & Output
14 Hardware Timers
Cryptographic Acceleration Unit
Random Number Generator
CRC Computation Unit
6 Serial Ports (2 with FIFO and Fast Baud Rates)
3 SPI Ports (1 with FIFO)
3 I2C Ports
Real-Time Clock
62.3mm x 18.0mm x 4.2mm (2.5in x 0.7in x 0.2in)
DOCUMENTS
Datasheet (MK64FX512VMD12)
Manual (MK64FX512VMD12)
Teensy Quick Start
Teensyduino Software
Pin Assignment Charts
Front
Back
Using the RTC
Teensy Help Page and FAQ
#proe
#Teensy
www.pr
The processor on the Teensy also has access to the USB and can emulate any kind of USB device you need it to be, making it great for USB-MIDI and other HID projects. The 32-bit, 120MHz processor brings a few other features to the table as well, such as multiple channels of Direct Memory Access, several high-resolution ADCs and even an I2S digital audio interface! There are also four separate interval timers, plus a delay timer! Oh yeah, and all digital pins have interrupt capability and are 5V tolerant.
All of this functionality is jammed into a 62.3mm x 18.0mm board with all solder points on a 0.1" grid so you can slap it on a breadboard and get to work! The Teensy 3.5 (as well as its sibling, the Teensy 3.6) is larger, faster and capable of more projects, especially with its onboard micro SD card port. An upgraded ARM Cortex MCU (120MHz from 72MHz), more memory (512K from 256K), as well as more RAM, EEPROM and accessible pins make up the key new features of this "teensy" board. The Teensy 3.5 is slightly scaled down from the Teensy 3.6 but is offered at a cheaper price point, comparatively.
120MHz ARM Cortex-M4 with Floating Point Unit
512K Flash, 256K RAM, 4K EEPROM
Microcontroller Chip MK64FX512VMD12
1 CAN Bus Port
16 General Purpose DMA Channels
5V Tolerance on All Digital I/O Pins
62 I/O Pins (42 breadboard friendly)
25 Analog Inputs to 2 ADCs with 13-bit resolution
2 Analog Outputs (DACs) with 12-bit resolution
20 PWM Outputs (Teensy 3.6 has 22 PWM)
USB Full Speed (12Mbit/sec) Port
Ethernet mac, capable of full 100Mbit/sec speed
Native (4-bit SDIO) micro SD card port
I2S Audio Port, 4-Channel Digital Audio Input & Output
14 Hardware Timers
Cryptographic Acceleration Unit
Random Number Generator
CRC Computation Unit
6 Serial Ports (2 with FIFO and Fast Baud Rates)
3 SPI Ports (1 with FIFO)
3 I2C Ports
Real-Time Clock
62.3mm x 18.0mm x 4.2mm (2.5in x 0.7in x 0.2in)
DOCUMENTS
Datasheet (MK64FX512VMD12)
Manual (MK64FX512VMD12)
Teensy Quick Start
Teensyduino Software
Pin Assignment Charts
Front
Back
Using the RTC
Teensy Help Page and FAQ
#proe
#Teensy
www.pr
Sản Phẩm Liên Quan
HOT
HOT