Bo Mạch Phát Triển Stm 32 F 103 C 8 T 6 Lõi Stm 32 Chuyên Dụng

Note: Our products only provide product information or details, no technical support, buyers need to understand themselves, thank you for your cooperation

Stm 32f 103 c8t6 development boards were pre-burned in advance, led, and to check whether the development board works properly.
Kernel: Arm 32 cortextm-m3 cpu
Maximum 72 mhz working frequency
Single-cycle multiplication and hard splitting
Memory
Fast flash memory memory from 64k or 128k bits
Up to 20k sram
Clock、 re-engineering and power management
2.0~3.6 volt and i/o lead
Power outage/power loss (Por/pdr)、 programmable design voltage monitoring
Equipment (Pvd)
4~16 mhz
Rc oscillators embedded in 8 mhz embedded from factory adjusted
Rc oscillator with calibrated 40 khz
Pll producing cpu clock
32khz rtc oscillator with calibration function
Low power consumption
Sleep、 downtime and standby mode
V bat power for rtc and reserve registers
2 12-bit modular converters, 1us conversion time (Up to 16
Scope of conversion: 0 to 3.6v
Double sampling and maintenance function
Temperature sensor
Dma:
7 dma
Periphery of support: Timer、 adc、 spi、 i 2c and
Usart
Up to 80 fast i/o ports
26/37/51/80 i/o, all i/o mouths can be mapped to
16 external interruptions Almost all ports can tolerate 5v letters
Resolution 2003/2008
Debugging mode
Serial single line debugging (Swd) Jtag interface
Up to 7 timers
3 16-bit timer, up to 4 per timer is used
Input the channel for capture/output comparison/pwm or pulse count
Increment encoder input
1 16-bit dead zone control and emergency brakes, used for motors
Pwm advanced control timer controlled
2 (Independent and window-type)
System timer: 24
Up to 9 communication interfaces
Up to 2 i2c interfaces (Support smbus/pmbus)
Up to 3 usart interfaces (Support iso 7816 interface,
Lin, irda interface and modulation demodulation control)
Up to 2 spi interfaces (18m bits/sec)
Can interface (2.0b initiative)
Usb 2.0
Crc calculation module, 96-bit chip unique