Bo Mạch Phân Phối Nguồn Pdb Xt60 Hỗ Trợ 5v 2a 12v 0.5a Cho Drone X Hoặc H
71.000
₫ 63.000
Sản phẩm Bo Mạch Phân Phối Nguồn Pdb Xt60 Hỗ Trợ 5v 2a 12v 0.5a Cho Drone X Hoặc H đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 71.000 xuống còn ₫ 63.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Explanation:
Material: circuit board
Color as shown
Board size: 5.2 cm* 3.6cm *0.3cm
Board weight: 7.5g (includes 11g)
2oz copper, 4-layers & 1.6mm PCB
Built-in XT60 Socket
Light and durable for intensive usage
Quick & Easy Installation
Total 6 pairs ESC solder tabs are fit for H or X type frame
5V & 12V Output LED indicators & Short circuit tolerant
General:
Input voltage range (3S-4S LiPo operation): 9-18V DC
Regulated outputs: 5V and 12V outputs
ESC outputs:
Continuous current: 25A*4 or 15A*6
Peak current (10 seconds/minute): 30A*4 or 20A*6
BEC 5V output:
Designed for: RC Receivers, Flight controllers, OSD, and Servos
BEC e: Linear
Voltage: 5.0 +/- 0.1VDC
Continuous current: 2 Amps (Max.2.5A 10s/minute)
Output Ripple: 40mV (VIn=16V, VOut=5V@2A load)
Short-circuit tolerant: 5 seconds/minute
BEC 12V output:
Designed for: Video TX or FPV camera with linear regulator
BEC e: Linear
Suggested battery: 4S LiPo (13~18V DC)
Voltage: 12.0 +/- 0.3VDC
Continuous current: 500mA (Max.0.8A 5s/minute)
Short-circuit tolerant: 2 seconds/minute
Package Contents:
1 * PDB Board
1 * XT60 Connector
1.The PDB-XT60 has been engineered to provide the highest performance and reliability in a 36*52mm & 4 layers PCB.
2.It distributes power from a LiPo pack to 6 ESCs, as well as providing synchronised & regulated DC 5V outputs & linear regulated DC 12V for powering Cameras, Servos, RC receiver, Flight Controllers, Video Transmitters, LEDs, etc.
3.The PDB-XT60 offers a Authentic Amass XT60 plug to connect the LiPo pack conveniently.
4.4-layer PCB Board, high current power and BEC stratification, avoid ground disturbance BEC power current;
5.This board makes the wiring nice, with the bonus of having the XT60 option. Stacked right on top of the CC3D with plenty of
Material: circuit board
Color as shown
Board size: 5.2 cm* 3.6cm *0.3cm
Board weight: 7.5g (includes 11g)
2oz copper, 4-layers & 1.6mm PCB
Built-in XT60 Socket
Light and durable for intensive usage
Quick & Easy Installation
Total 6 pairs ESC solder tabs are fit for H or X type frame
5V & 12V Output LED indicators & Short circuit tolerant
General:
Input voltage range (3S-4S LiPo operation): 9-18V DC
Regulated outputs: 5V and 12V outputs
ESC outputs:
Continuous current: 25A*4 or 15A*6
Peak current (10 seconds/minute): 30A*4 or 20A*6
BEC 5V output:
Designed for: RC Receivers, Flight controllers, OSD, and Servos
BEC e: Linear
Voltage: 5.0 +/- 0.1VDC
Continuous current: 2 Amps (Max.2.5A 10s/minute)
Output Ripple: 40mV (VIn=16V, VOut=5V@2A load)
Short-circuit tolerant: 5 seconds/minute
BEC 12V output:
Designed for: Video TX or FPV camera with linear regulator
BEC e: Linear
Suggested battery: 4S LiPo (13~18V DC)
Voltage: 12.0 +/- 0.3VDC
Continuous current: 500mA (Max.0.8A 5s/minute)
Short-circuit tolerant: 2 seconds/minute
Package Contents:
1 * PDB Board
1 * XT60 Connector
1.The PDB-XT60 has been engineered to provide the highest performance and reliability in a 36*52mm & 4 layers PCB.
2.It distributes power from a LiPo pack to 6 ESCs, as well as providing synchronised & regulated DC 5V outputs & linear regulated DC 12V for powering Cameras, Servos, RC receiver, Flight Controllers, Video Transmitters, LEDs, etc.
3.The PDB-XT60 offers a Authentic Amass XT60 plug to connect the LiPo pack conveniently.
4.4-layer PCB Board, high current power and BEC stratification, avoid ground disturbance BEC power current;
5.This board makes the wiring nice, with the bonus of having the XT60 option. Stacked right on top of the CC3D with plenty of