Bộ Giả Lập St-Link V2 Stm8 / Stm32
₫ 141.500
Sản phẩm Bộ Giả Lập St-Link V2 Stm8 / Stm32 đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
ST-LINK V2 STM8/STM32 Emulator Programmer STLINK Downloader Debugger
Product Description
1. Use the U disk shell to install the internal motherboard, which is convenient to carry, safe and reliable!
2, the interface definition is directly marked on the shell, at a glance, convenient and practical!
3, 5V, 3.3V are provided at the same time, which is convenient for you to connect 5V and 3.3V target boards.
4, the shell characters use laser laser, laser engraving, never fade off! Permanently clear and clear!
5, the internal motherboard with 500MA self-recovery fuse, completely protect your expensive computer motherboard!
6, LED indicator, convenient for you to observe the working status of ST-LINK V2 from time to time!
7, delivery 4 and DuPont line, so that you can easily deal with different target board line order!
8, the outer packaging uses anti-static bag, automatic sealing machine sealed packaging, safe and reliable, not afraid of static electricity, not afraid of water!
Features and features:
1, support a full range of STM32 SWD interface debugging, 4-wire interface is simple (including power), fast, stable operation; interface definition shell directly marked! No need to flip through the instructions!
2, support a full range of STM8 SWIM download debugging (common development environment such as IAR, STVD, etc. are supported); supported software versions are as follows:
1. ST-LINK Utility 2.0 and above
2. STVD 4.2.1 and above
3. STVP 3.2.3 and above
4. IAR EWARM V6.20 and above
5. IAR EWSTM8 V1.30 and above
6. KEIL RVMDK V4.21 and above
3. Support firmware automatic upgrade to ensure follow-up support for ST products. The firmware has been upgraded to the latest V2.J17.S4 at the factory;
4, increase 5V power output, output I / O port are protected, not afraid of operating errors caused ST-LINK V2 damage!
5, the interface uses pure copper gold-plated 2.54 pitch simple horn seat, with 20CM DuPont line, can handle different target board line order, flexible wiring;
6, use U disk aluminum alloy shell to protect the motherboard, easy to carry, not afraid of static electricity, not afraid of falling and falling.
7, with the information package, the information contains: (electronic file)
1.LINK / V2 drive;
2.KEIL MDK (4.60) development environment (and other common development environments)
3.IAR STM8 (1401) development environment (and other common development environments)
4. STVD STM8 development environment (and other common development environments)
5. several classic STM32 materials (including a large number of example source code and video tutorials)
6. Several classic STM8 data (including a large number of example source code and learning experi
Product Description
1. Use the U disk shell to install the internal motherboard, which is convenient to carry, safe and reliable!
2, the interface definition is directly marked on the shell, at a glance, convenient and practical!
3, 5V, 3.3V are provided at the same time, which is convenient for you to connect 5V and 3.3V target boards.
4, the shell characters use laser laser, laser engraving, never fade off! Permanently clear and clear!
5, the internal motherboard with 500MA self-recovery fuse, completely protect your expensive computer motherboard!
6, LED indicator, convenient for you to observe the working status of ST-LINK V2 from time to time!
7, delivery 4 and DuPont line, so that you can easily deal with different target board line order!
8, the outer packaging uses anti-static bag, automatic sealing machine sealed packaging, safe and reliable, not afraid of static electricity, not afraid of water!
Features and features:
1, support a full range of STM32 SWD interface debugging, 4-wire interface is simple (including power), fast, stable operation; interface definition shell directly marked! No need to flip through the instructions!
2, support a full range of STM8 SWIM download debugging (common development environment such as IAR, STVD, etc. are supported); supported software versions are as follows:
1. ST-LINK Utility 2.0 and above
2. STVD 4.2.1 and above
3. STVP 3.2.3 and above
4. IAR EWARM V6.20 and above
5. IAR EWSTM8 V1.30 and above
6. KEIL RVMDK V4.21 and above
3. Support firmware automatic upgrade to ensure follow-up support for ST products. The firmware has been upgraded to the latest V2.J17.S4 at the factory;
4, increase 5V power output, output I / O port are protected, not afraid of operating errors caused ST-LINK V2 damage!
5, the interface uses pure copper gold-plated 2.54 pitch simple horn seat, with 20CM DuPont line, can handle different target board line order, flexible wiring;
6, use U disk aluminum alloy shell to protect the motherboard, easy to carry, not afraid of static electricity, not afraid of falling and falling.
7, with the information package, the information contains: (electronic file)
1.LINK / V2 drive;
2.KEIL MDK (4.60) development environment (and other common development environments)
3.IAR STM8 (1401) development environment (and other common development environments)
4. STVD STM8 development environment (and other common development environments)
5. several classic STM32 materials (including a large number of example source code and video tutorials)
6. Several classic STM8 data (including a large number of example source code and learning experi
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000