Bộ ghi âm USB 60 ngày 10000

Temppu05 temperature data recorder pdf report disposable usb temperature recorder temperature recorder

Characteristics:
- widely used in the monitoring of transportation and storage processes for food, medicine and chemical products.
- after the record is finished, you can plug directly into the computer to get pdf reports.
- built-in usb connector, directly connected to pc or mobile phone without cable or reader.
- high accuracy ±0.5°High sensitivity.
- it's small and easy to carry.
- a wide range of temperature measurements, allowing for the storage of 10,000 data.

Norms:
Condition: 100% new
Project type: temperature recorder
Material: plastic
Color: as shown in figure
Size: approximately 67x28mm/2.64x1.1 in (long x wide)
Weight: approximately 13g/0.5 oz
Type: one time
Recording interval: 10 minutes
Accuracy: ±0.5°C (- 20)°C+40°C)
Beyond range: ±1°C
Data capacity: 10000
Alarm temperature range: < 2°C or > 8°C (< 35.6°F or > 46.4°F)
Start-up delay: 30 minutes
Working ambient temperature: - 30°C travel charger+60°C

Note:
- press the start/stop button for more than 3 seconds, and the ok indicator lights will light 3s, indicating that the device begins to record and then can be placed in an environment that requires monitoring.
- during the recording process, the device will be automatically lit every 10 seconds.If the normal indicator (i.e. green light) is lit every 10 seconds, it means that the equipment is not overheating during the recording process.If the alarm indicator (i.e., red indicator) is on every 10 seconds, it indicates that the record is overheated.Note: the green light will no longer shine as long as the temperature is found to be too high during the recording.
- press the start/stop button for more than 3 seconds, and the warning indicator (i.e., red light) will be on for 3 seconds, indicating that the device will stop recording.The recording will also stop automatically when the device is full.When the device stops recording, it will not flicker automatically.If the device is too hot during recording, press the start/stop button.If the normal indicator (green indicator) is on, the temperature is not overrecorded during recording.If the alarm is an indicator (i.e. a red light) on, it indicates that the temperature is too high during recording.
- remove the waterproof bag and insert the device into the computer's usb interface.Normal indicator (i.e. green light) and alarm indicator (i.e. red light) will be lit during pdf file generation.When a file is generated, the general indicator (i.e. the green light) will remain light until the printer is unloaded from the computer.

Packing list:
1 x temperature recorder

Note
- due to manual measurements, allow error of 1 2 cm.Thank you for your understanding.
- the display is not calibrated in the same way, and the color of the project shown in the photo may be slightly different from that of the object.Please refer to the actual situation.
- please do not open the package.Before t