Bộ Dụng Cụ Tháo Lắp 3 Bánh Răng Chuyên Dụng
642.100
₫ 340.100
Sản phẩm Bộ Dụng Cụ Tháo Lắp 3 Bánh Răng Chuyên Dụng đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 642.100 xuống còn ₫ 340.100, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
100% brand new and high quality
Features:
This is a widely used three-jaw bearing puller, which can be applied to automotive bearings, motorcycle electric vehicle bearings, mechanical bearings, agricultural machinery, etc., with high strength and torque, good toughness, solid and practical.
Removes all sleeve-type bearings with 1/2"-2" inside diameter.
Can be applied to automotive bearings, motorcycle electric vehicle bearings, mechanical bearings, agricultural machinery, and so on.
Made of fine quality carbon steel, has a long service life.
The claw feet have positive and negative two installation methods.
Special heat treatment, high strength and torque, good toughness, solid and practical.
Removes pilot bearings,pump bearings,brushings.
Specification:
Material: carbon steel
Color: black
Range of application: 14-38mm / 0.6-1.5in
Pull range: 50-95mm / 2.0-3.7in
Claw length: 80mm / 3.1in
Arm length: 86mm / 3.4in
Wire rod length: 175mm / 6.9in
Hexagonal diameter: 14mm / 0.6in
Bar length: 125mm / 4.9in
Total height: 200mm / 7.9in
Total width: 135mm / 5.3in
Quanti
ty: (other accessories demo in the picture are not included!)
Note:1.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
-Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package includes(without retail package):
1 * 3-jaw Inner Bearing Puller
Features:
This is a widely used three-jaw bearing puller, which can be applied to automotive bearings, motorcycle electric vehicle bearings, mechanical bearings, agricultural machinery, etc., with high strength and torque, good toughness, solid and practical.
Removes all sleeve-type bearings with 1/2"-2" inside diameter.
Can be applied to automotive bearings, motorcycle electric vehicle bearings, mechanical bearings, agricultural machinery, and so on.
Made of fine quality carbon steel, has a long service life.
The claw feet have positive and negative two installation methods.
Special heat treatment, high strength and torque, good toughness, solid and practical.
Removes pilot bearings,pump bearings,brushings.
Specification:
Material: carbon steel
Color: black
Range of application: 14-38mm / 0.6-1.5in
Pull range: 50-95mm / 2.0-3.7in
Claw length: 80mm / 3.1in
Arm length: 86mm / 3.4in
Wire rod length: 175mm / 6.9in
Hexagonal diameter: 14mm / 0.6in
Bar length: 125mm / 4.9in
Total height: 200mm / 7.9in
Total width: 135mm / 5.3in
Quanti
ty: (other accessories demo in the picture are not included!)
Note:1.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
-Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package includes(without retail package):
1 * 3-jaw Inner Bearing Puller
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000