Bộ Đồ Chơi Thí Nghiệm Khoa Học Cho Bé
44.000
₫ 39.343
Sản phẩm Bộ Đồ Chơi Thí Nghiệm Khoa Học Cho Bé đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 44.000 xuống còn ₫ 39.343, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Dear, welcome to Deceble, I wish you a pleasant shopping experience here, the following is our new product, welcome to buy, please go down to see ~
Kids Children Wood DIY Balance Scale Weigh Kit Model Science Experiment Developmental Toys
Specifications:
Material: Wood
Size: 20 X 18 X 6cm/7.87 X 7.09 X 2.36"
Installation steps:
1. Apply double-sided or wood glue to the contact surface and install base, dial and bracket.
2. Install the tray, 1.5cm away from the dial, as shown in the figure, and keep the position in the center as far as possible.
3. Make two holes in opposite corners of the cups, and tie each end of the rope to the cup. It is suggested that two laps should be inserted to prevent the rope from slipping and keep the rope as same height as possible.
4. Mounting pointer, fixed with shaft sleeve.
Notes:
1. The two cups in the picture are photography props, and the purchase of this product does not contain cups, please provided by yourself. Ordinary or disposable paper cups/plastic cups are just ok.
2. Due to small parts including,Please take good care of your kids and avoid swallowing.
3. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
4. Please allow 1-3mm measuring deviation due to manual measure
Kids Children Wood DIY Balance Scale Weigh Kit Model Science Experiment Developmental Toys
Specifications:
Material: Wood
Size: 20 X 18 X 6cm/7.87 X 7.09 X 2.36"
Installation steps:
1. Apply double-sided or wood glue to the contact surface and install base, dial and bracket.
2. Install the tray, 1.5cm away from the dial, as shown in the figure, and keep the position in the center as far as possible.
3. Make two holes in opposite corners of the cups, and tie each end of the rope to the cup. It is suggested that two laps should be inserted to prevent the rope from slipping and keep the rope as same height as possible.
4. Mounting pointer, fixed with shaft sleeve.
Notes:
1. The two cups in the picture are photography props, and the purchase of this product does not contain cups, please provided by yourself. Ordinary or disposable paper cups/plastic cups are just ok.
2. Due to small parts including,Please take good care of your kids and avoid swallowing.
3. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
4. Please allow 1-3mm measuring deviation due to manual measure
Sản Phẩm Liên Quan
HOT
HOT