Bộ Đồ Chơi Lắp Ráp Mô Hình Tàu Chiến 3d Tỉ Lệ 1: 400
100.308
₫ 60.185
Sản phẩm Bộ Đồ Chơi Lắp Ráp Mô Hình Tàu Chiến 3d Tỉ Lệ 1: 400 đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 100.308 xuống còn ₫ 60.185, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Features:
100% Brand new and high quality
Material: Paper
Size: 54*8cm(when you finish assemle it )
Scale: 1:400
Difficulty: 4 star(6 star is max)
With printed instruction
You will receive a set of colour-printed cards not a finished model.need buyer to handmade.
Package include: 1PC
Please Note: what you receive is not finished product, it need you to cut, paste and assemble.
Guide to build: Basic steps to make Paper Models.
1) Cut out each part roughly.
2) Use a pencil to mark note softly behind each part to avoid disorder (Don't use a pen as it probably makes damaged trace on the front side).
3) Use Scissor or Craft Knife to cut parts precisely by following the outer edge. The level of precision affects the effect of combination. (Cut the most outer edge if the line is thick).
4) Smear white adhesive cement on one of the 2 parts which needed to be stuck together.
5) Stick them together until the cement bone-dry.
Suggested TIPS :
A. For Scissor cutting, suggest not to push the Scissor but pull the paper.
B. To make the fold of parts better, please put the part firmly on the table, and put the ruler on that to fold the line. If you have to fold inside, you could first fold it softly outside to make the trace, and fold it back to inside then.
C. To make the curved parts better, place the part on the corner of table then push and pull it back and forth.
D. To make parts like cylinder, use tools such as pen to assist to make the curl more nat
100% Brand new and high quality
Material: Paper
Size: 54*8cm(when you finish assemle it )
Scale: 1:400
Difficulty: 4 star(6 star is max)
With printed instruction
You will receive a set of colour-printed cards not a finished model.need buyer to handmade.
Package include: 1PC
Please Note: what you receive is not finished product, it need you to cut, paste and assemble.
Guide to build: Basic steps to make Paper Models.
1) Cut out each part roughly.
2) Use a pencil to mark note softly behind each part to avoid disorder (Don't use a pen as it probably makes damaged trace on the front side).
3) Use Scissor or Craft Knife to cut parts precisely by following the outer edge. The level of precision affects the effect of combination. (Cut the most outer edge if the line is thick).
4) Smear white adhesive cement on one of the 2 parts which needed to be stuck together.
5) Stick them together until the cement bone-dry.
Suggested TIPS :
A. For Scissor cutting, suggest not to push the Scissor but pull the paper.
B. To make the fold of parts better, please put the part firmly on the table, and put the ruler on that to fold the line. If you have to fold inside, you could first fold it softly outside to make the trace, and fold it back to inside then.
C. To make the curved parts better, place the part on the corner of table then push and pull it back and forth.
D. To make parts like cylinder, use tools such as pen to assist to make the curl more nat