Bộ Điều Khiển Sạc Năng Lượng Mặt Trời 10a-60a Mppt 12v / 24v
210.400
₫ 105.200
Sản phẩm Bộ Điều Khiển Sạc Năng Lượng Mặt Trời 10a-60a Mppt 12v / 24v đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 210.400 xuống còn ₫ 105.200, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,5 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Specification:
Material: ABS
Color: Black+Orange
Display: LCD screen
Batt Voltage: 12v/24v auto
Rated Current: 10A, 20A, 30A
Self-consumption: ＜10MA
Working temperature: -35 ℃ -60 ℃
Max solar input: 12v battery, the highest 23v; 24v battery when the highest 46v
Float charge: 13.7v(defaul, adjustable)
Discharge stop: 10.7v(defaul, adjustable)
Discharge reconnect: 12.6v(defaul, adjustable)
Charge reconnect: 13v
Voltage of open light: solar panel 8v(Light lights delay)
Voltage of close light: Solar panel 8v(Light off delay)
USB output: 2 way USB output, 5V/2.5A(MAX)
Size: (L)X(W)X(H)133.5X70X35mm /5.26''X2.76''X1.38"(appr.)
Feature:
Build-in industrial micro controller
Fully 3-stage PWM charge management
Big LCD display, all adjustable parameter
Dual mosfet reverse current protection, low heat production
Dual USB output, the maximum current of 2.5A, to support Apple's mobile phone charging
Build-in short-circuit protection, open-circuit protection, reverse protection, over-load protection
Suitable for solar green light, solar light boxes advertising board, solar insecticidal lights, housing solar power generation system, marine solar power generation system, outdoor survival solar power generation system
SAFETY INSTRUCTIONS
1.Make sure your battery has enough voltage for the controller to recognize the battery type before first installation
2.The battery cable should be as short as possible to minimize loss
3.The regulator is only suitable for lead acid batteries: OPEN,AGM,GEL, it is not suited for nickel metal hydride, lithiumions or other batteries
4.The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator
SYSTEM CONNECTION
1.Connect the battery to the charge regulator-plus and minus
2.Connect the photovoltaic module to the regulator-plus and minus
3.Connect the consumer to the regulator-plus and minus
The reverse order applies when deinstalling
An improper sequence order can damage the controller
Package included:
1 X Solar Charger Controller
1 X English Manual
Note:
- Please allow slight dimension difference due to manual measurement.
- Please consider the actual sizes in the listing as the pictures are generally enlarged to show detail.
- Due to different producing batches, product details might be a little different. If you minding the difference, please buy it carefully.
- Due to the light and screen difference, the item's color may be slightly different from the pictures. Thanks for your understanding.
Material: ABS
Color: Black+Orange
Display: LCD screen
Batt Voltage: 12v/24v auto
Rated Current: 10A, 20A, 30A
Self-consumption: ＜10MA
Working temperature: -35 ℃ -60 ℃
Max solar input: 12v battery, the highest 23v; 24v battery when the highest 46v
Float charge: 13.7v(defaul, adjustable)
Discharge stop: 10.7v(defaul, adjustable)
Discharge reconnect: 12.6v(defaul, adjustable)
Charge reconnect: 13v
Voltage of open light: solar panel 8v(Light lights delay)
Voltage of close light: Solar panel 8v(Light off delay)
USB output: 2 way USB output, 5V/2.5A(MAX)
Size: (L)X(W)X(H)133.5X70X35mm /5.26''X2.76''X1.38"(appr.)
Feature:
Build-in industrial micro controller
Fully 3-stage PWM charge management
Big LCD display, all adjustable parameter
Dual mosfet reverse current protection, low heat production
Dual USB output, the maximum current of 2.5A, to support Apple's mobile phone charging
Build-in short-circuit protection, open-circuit protection, reverse protection, over-load protection
Suitable for solar green light, solar light boxes advertising board, solar insecticidal lights, housing solar power generation system, marine solar power generation system, outdoor survival solar power generation system
SAFETY INSTRUCTIONS
1.Make sure your battery has enough voltage for the controller to recognize the battery type before first installation
2.The battery cable should be as short as possible to minimize loss
3.The regulator is only suitable for lead acid batteries: OPEN,AGM,GEL, it is not suited for nickel metal hydride, lithiumions or other batteries
4.The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator
SYSTEM CONNECTION
1.Connect the battery to the charge regulator-plus and minus
2.Connect the photovoltaic module to the regulator-plus and minus
3.Connect the consumer to the regulator-plus and minus
The reverse order applies when deinstalling
An improper sequence order can damage the controller
Package included:
1 X Solar Charger Controller
1 X English Manual
Note:
- Please allow slight dimension difference due to manual measurement.
- Please consider the actual sizes in the listing as the pictures are generally enlarged to show detail.
- Due to different producing batches, product details might be a little different. If you minding the difference, please buy it carefully.
- Due to the light and screen difference, the item's color may be slightly different from the pictures. Thanks for your understanding.
Sản Phẩm Liên Quan
HOT
Bọt biển vệ sinh mũi mỏ hàn
₫ 2.000
HOT
Dây hơi khí nén PU bán theo mét
₫ 3.500