Bộ Điều Khiển Nhiệt Độ Kỹ Thuật Số Pid Rex C100 + 40da Ssr + Cảm Biến

[Dual Digital Display PID Temperature Controller Set] PID Controller Set comes with digital PID REX-C100 Temperature Controller max.40A SSR K Thermocouple for your use
[Compatibility]This PID Temp Control is specially designed for single phase solid state relay
[Proportional Band (P)] 0~full range (ON/OFF control when set to 0)
[Time Set)]Integral time (I):0~3600 sec (No integral action when set to 0), Derivative time (D):0~3600 sec (No derivative action when set to 0) [Setting value (SV)]identical to measuring range (PV)
1.REX-C100 Temperature Controller 2.Measuring accuracy:+/-0.5%FS 3.Cold-end compensation tolerance:+/-2 Celsius can be ified by software in 0~50 Celsius
4.Resolution:14 bit
5.Sampling cycle:0.5 Sec
6.Power:AC 110-240V 50/60HZ
7.Process value (PV), Setting value (SV)
8.Output, alarm and self-tuning can be indicated by:LED
9.PIN control (including ON/OFF, step-type PID and continuous PID)
10.Self-tuning control
11.Relay output:contact capacity 250V AC 3A (resistive load)
12.Alarm function output:2 way
13.Proportional (P):0~full range (ON/OFF control when set to 0)
14.Detective temperature range:0 to 1300 Celsius
15.Insulation resistance:Greater than50M ohm(500V DC)
16.Insulation resistance:1500V AC/min
17.Insulation resistance:Power Consumption Less than 10 VA
18.Service environment:0~50 Celsius
19.Environment with no corrosive gas 30~85% RH
K Thermocouple Probe Cable
1.Length:1M
2.Sensor diameter:4.5mm
3.Temperature rang:0 to 400 Celsius(U can install to 1300 Celsius K Thermocouple Probe(not included) )
4.Internal Insulation:Fiberglass
5.External Shielding:Insulated Shielding
Max.40A SSR
1.Output Voltage Range:Standard Type
2.Output Current:40A
3.Input Voltage:DC 3-32V
4.Output Voltage:24-380V ACcolour:Black + white
Material:plastic
Package Contents:
1 * PID Controller
1 * SSR-40DA
1 * K Thermocouple Sensor
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1