Bộ Điều Chế Thực Tế Đa Năng Cho Tv Gia Đình Bền Dễ Dàng Cài Đặt Tiện Dụng Chất Lượng Cao

Features:
Be able to connect for Sky HD set top boxes.
Specifically designed for use with TV-Link products.
Allow you to watch and control for Sky box from another TV in your home.
Converts the signal from I/O port to an RF output.
 
Specifications:
Type: Modulator
Material: ABS
Color: Black
Size: About 10.5x7.3x2.5cm
RF Modulator Output Channels:21~69ch
RF Input Connector: IEC female
RF Output Connector: IEC male
I/O Connection: 10 Pin mini DIN Plug on 250mm fly lead
Operating Temperature: 0 to 40 degree
 
For Sky IO-LINK or LINK for SkyHD :
The IO-LINK creates a TV-LINK enabled RF output for SkyHD set top boxes with no RF2 output.
Once installed the IO-LINK can be connected to an in home distribution system for viewing at multiple TV locations.
Specifically designed for use with TV-Link (Magic Eye) products
Before you install your IO SYNC :
Ensure you have a coaxial cable linking between for SKY™ box and your second TV.
 
Installing your IO SYNC
Switch off the for SKY™ STB and disconnect the mains plug.
Connect the IO SYNC directly to the IO port located on the back of the for SKY™STB
Connect one end of the coaxial cable (female connector) to the “RF out” of the IO SYNC
And the other (male connector) to your second TV.
Connect your aerial feed to the “RF in” connector of the IO SYNC, if off air terrestrial is required.
Tuning your second TV
Perform either an auto or manual scan on your second TV as per your TV’s instructions to find for SKY™ STB’s output (default Ch68)
 
Alternatively change the for SKY™ STB output channel by following the instructions below.
 
Press the SERVICES button on for Sky™ Remote Control.
Press the right button on  for Sky™ remote control (SETTINGS).
Press the down button on for Sky™ remote control to highlight PICTURE.
Press 0 then 1 then the SELECT button and SETUP will be highlighted.
Press the right button 3 times to highlight RF OUT.
Press the down button and use the number buttons to change the channel number currently showing as channel 68.
Choose a channel between 21 & 69, the most common being 21, 26, 47, 69.
Press the down button and use the right button to change the RF Outlet Power Supply setting from OFF to ON.
Press the Green button to save the new settings and then press the for Sky™ button to return to normal viewing.
Finish by returning to your second TV and performing a retune.
 
Package Included:
1 PC x  Modulator
 
Note:
1. Due to the light and screen difference, the item's color may be slightly different from the pictures.
2. Please allow 0.5-2 cm differences due to manual measurement.
#Modulator #Universal #RF #Output #Home #Practical #ABS #Tool #Durable #Househol